Works great with IPMI! How could I write an agent for the ILOM? Thanks and BR On Nov 22, 2007 2:22 AM, Brieseneck, Arne, VF-Group <Arne.Brieseneck@xxxxxxxxxxxx> wrote: > Hi Fabian, > > I have created a new account on each ILOM board. This account is > mentioned in the cluster.conf section. > > > Cheers, > Arne > > -----Original Message----- > From: linux-cluster-bounces@xxxxxxxxxx > > [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Fabian Salamanca > Dominguez > Sent: Mittwoch, 21. November 2007 21:48 > To: linux clustering > Subject: Re: Sun ILOM > > Thanks all for the prompt responses! > > Arne, > > I have a doubt, which type of authentication do you use for ILOM's IPMI > configuration in the fence devices section? > > thanks!!! > > On Nov 13, 2007 9:52 AM, Brieseneck, Arne, VF-Group > <Arne.Brieseneck@xxxxxxxxxxxx> wrote: > > > > > > I have a 40 node SUN X4100 cluster with fence_ipmilan running. > > If you have any questions let me know... > > > > > > ________________________________ > > From: linux-cluster-bounces@xxxxxxxxxx > > [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Fair, Brian > > Sent: Dienstag, 13. November 2007 16:33 > > To: linux clustering > > Subject: RE: Sun ILOM > > > > > > > > > > I'm sure you know this, but Sun has shipped several different out of > > band management solutions over the years. They have different > > software, commands, and features. > > > > Some (all maybe, couldn't say) of the newer stuff is IPMI... > > coolthreads, the newer x86 based boxes certainly, etc. There are a few > > > different types it could be if its older equipment. > > > > Just something to keep in mind if you hear that IPMI is working for a > > Sun box. > > > > Curious -- what kind of hardware are you building out your cluster on? > > > > -Brian > > > > ________________________________ > > From: linux-cluster-bounces@xxxxxxxxxx > > [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Dave Costakos > > Sent: Monday, November 12, 2007 2:21 PM > > To: linux clustering > > Subject: Re: Sun ILOM > > > > > > I should say that I am successfully using fence_ipmi in a 3-node Sun > > 4600 cluster -- though I obviously had to connect to the iLOM via the > > network interface rather than the serial interface (which is our > normal procedure). > > > > -Dave. > > > > > > On Nov 12, 2007 9:02 AM, Kevin Anderson <kanderso@xxxxxxxxxx> wrote: > > > > > > > > > > > On Mon, 2007-11-12 at 10:48 -0600, Fabian Salamanca Dominguez wrote: > > > > > > Hi! > > > > > > Are Sun's LOM and ILOM cards supported as fencing devices for Red > > > Hat Cluster Suite? > > > > > > > > > No one has implemented a fencing script for those devices as of yet. > > > > I > > believe people have had success using fence_ipmi with the Sun > > hardware, so you might want to try that. Alternatively, if you have > > access to the hardware, take a look at implementing the fence agent. > > > > > > Kevin > > > -- > > > Linux-cluster mailing list > > > Linux-cluster@xxxxxxxxxx > > > https://www.redhat.com/mailman/listinfo/linux-cluster > > > > > > > > > > > -- > > Dave Costakos > > mailto:david.costakos@xxxxxxxxx > > -- > > Linux-cluster mailing list > > Linux-cluster@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/linux-cluster > > > > > > -- > Fabian > > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster > > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster > -- Fabian -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
