Hi Fabian, I have created a new account on each ILOM board. This account is mentioned in the cluster.conf section. Cheers, Arne -----Original Message----- From: linux-cluster-bounces@xxxxxxxxxx [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Fabian Salamanca Dominguez Sent: Mittwoch, 21. November 2007 21:48 To: linux clustering Subject: Re: Sun ILOM Thanks all for the prompt responses! Arne, I have a doubt, which type of authentication do you use for ILOM's IPMI configuration in the fence devices section? thanks!!! On Nov 13, 2007 9:52 AM, Brieseneck, Arne, VF-Group <Arne.Brieseneck@xxxxxxxxxxxx> wrote: > > > I have a 40 node SUN X4100 cluster with fence_ipmilan running. > If you have any questions let me know... > > > ________________________________ > From: linux-cluster-bounces@xxxxxxxxxx > [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Fair, Brian > Sent: Dienstag, 13. November 2007 16:33 > To: linux clustering > Subject: RE: Sun ILOM > > > > > I'm sure you know this, but Sun has shipped several different out of > band management solutions over the years. They have different > software, commands, and features. > > Some (all maybe, couldn't say) of the newer stuff is IPMI... > coolthreads, the newer x86 based boxes certainly, etc. There are a few > different types it could be if its older equipment. > > Just something to keep in mind if you hear that IPMI is working for a > Sun box. > > Curious -- what kind of hardware are you building out your cluster on? > > -Brian > > ________________________________ > From: linux-cluster-bounces@xxxxxxxxxx > [mailto:linux-cluster-bounces@xxxxxxxxxx] On Behalf Of Dave Costakos > Sent: Monday, November 12, 2007 2:21 PM > To: linux clustering > Subject: Re: Sun ILOM > > > I should say that I am successfully using fence_ipmi in a 3-node Sun > 4600 cluster -- though I obviously had to connect to the iLOM via the > network interface rather than the serial interface (which is our normal procedure). > > -Dave. > > > On Nov 12, 2007 9:02 AM, Kevin Anderson <kanderso@xxxxxxxxxx> wrote: > > > > > > > On Mon, 2007-11-12 at 10:48 -0600, Fabian Salamanca Dominguez wrote: > > > > Hi! > > > > Are Sun's LOM and ILOM cards supported as fencing devices for Red > > Hat Cluster Suite? > > > > > > No one has implemented a fencing script for those devices as of yet. > > I > believe people have had success using fence_ipmi with the Sun > hardware, so you might want to try that. Alternatively, if you have > access to the hardware, take a look at implementing the fence agent. > > > > Kevin > > -- > > Linux-cluster mailing list > > Linux-cluster@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/linux-cluster > > > > > > -- > Dave Costakos > mailto:david.costakos@xxxxxxxxx > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster > -- Fabian -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
