On Wed, 29 Aug 2007, Jeremy Carroll wrote:
> Can you post the contents of the [GLOBAL] seconds of /etc/lvm/lvm.conf?
global {
# The file creation mask for any files and directories created.
# Interpreted as octal if the first digit is zero.
umask = 077
# Allow other users to read the files
#umask = 022
# Enabling test mode means that no changes to the on disk metadata
# will be made. Equivalent to having the -t option on every
# command. Defaults to off.
test = 0
# Whether or not to communicate with the kernel device-mapper.
# Set to 0 if you want to use the tools to manipulate LVM metadata
# without activating any logical volumes.
# If the device-mapper kernel driver is not present in your kernel
# setting this to 0 should suppress the error messages.
activation = 1
# If we can't communicate with device-mapper, should we try running
# the LVM1 tools?
# This option only applies to 2.4 kernels and is provided to help you
# switch between device-mapper kernels and LVM1 kernels.
# The LVM1 tools need to be installed with .lvm1 suffices
# e.g. vgscan.lvm1 and they will stop working after you start using
# the new lvm2 on-disk metadata format.
# The default value is set when the tools are built.
# fallback_to_lvm1 = 0
# The default metadata format that commands should use - "lvm1" or "lvm2".
# The command line override is -M1 or -M2.
# Defaults to "lvm1" if compiled in, else "lvm2".
# format = "lvm1"
# Location of proc filesystem
proc = "/proc"
# Type of locking to use. Defaults to file-based locking (1).
# Turn locking off by setting to 0 (dangerous: risks metadata corruption
# if LVM2 commands get run concurrently).
# locking_type = 1
# Local non-LV directory that holds file-based locks while commands are
# in progress. A directory like /tmp that may get wiped on reboot is OK.
# locking_dir = "/var/lock/lvm"
# Other entries can go here to allow you to load shared libraries
# e.g. if support for LVM1 metadata was compiled as a shared library use
# format_libraries = "liblvm2format1.so"
# Full pathnames can be given.
# Search this directory first for shared libraries.
# library_dir = "/lib/lvm2"
# Enable these three for cluster LVM when clvmd is running.
# Remember to remove the "locking_type = 1" above.
#
# locking_library = "liblvm2clusterlock.so"
# locking_type = 2
# library_dir = "/lib/lvm2"
locking_type = 2
locking_library = "/lib/liblvm2clusterlock.so"
}
Hope it helps.
Best regards,
Jozsef
--
E-mail : kadlec@xxxxxxxxxxxxxxx, kadlec@xxxxxxxxxxxxxxxxx
PGP key: http://www.kfki.hu/~kadlec/pgp_public_key.txt
Address: KFKI Research Institute for Particle and Nuclear Physics
H-1525 Budapest 114, POB. 49, Hungary
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
