On Tue, Jul 03, 2007 at 06:20:23PM -0500, Chris Harms wrote: > To recap: > I am attempting to setup a 2 node cluster where each will run a DB and > an apache service to be failed over between them. Both are fenced via > Dell DRAC connected via the system NICs (this adds to the issue, but > manual fencing is broken). > > My test case so far is to unplug the network cables from one node and > then reconnect them. For some reason, both machines get halted instead > of one machine being fenced. Having only one node fenced in this > scenario has only occurred successfully one time. > > I previously suspected DRBD as being the culprit, but I can now rule > this out after performing the cable pull test without RHCS running, and > having DRBD in every possible configuration the cluster could put it in, > including a split brain (which is impossible for me due to services not > failing over until fencing occurs). > > Is there any component of the cluster system that would issue the > shutdown command shown in the log entry below? Perhaps qdisk? Dave -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
