Hi Mike
Could you show the output of cat /proc/scsi/scsi?
I think that it can recognize only the drive of LUN number 0.
1. Add the following line to/etc/modprobe.conf.
options scsi_mod.o max_scsi_luns=255
2. Next, this setting must be read when you boot OS.
#mkinitrd /boot/< your initrd image > `uname -r`
Regard
------------------------------------------------------
Shirai Noriyuki
Chief Engineer Technical Div. System Create Inc
Kanda Toyo Bldg, 3-4-2 Kandakajicho
Chiyodaku Tokyo 101-0045 Japan
Tel81-3-5296-3775 Fax81-3-5296-3777
e-mail:shirai@xxxxxxxxxx web:http://www.sc-i.co.jp
------------------------------------------------------
> With all of the tech's on this list... no one has seen this problem?
> Thought I'd ask again since I'm still stumped.
>
> By the way, anyone know of any user groups, forums for the Xyratex/MTI
style
> storage chassis?
>
> Mike
>
> >This might or might not be the right list and if it is not, does anyone
know
> >one that would cover things like fibre channel RAID devices?
>
> >I have an 800GB RAID drive which I have split into 32 smaller volumes.
This
> >is a fibre channel system, Xyratex. The problem is that I cannot see any
more
> >than 2 volumes per controller when I check from any of the nodes.
>
> >Basically, I would like to set up a small volume for each node along with
> >their various GFS volumes.
>
>
>
> --
> Linux-cluster mailing list
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
