Hi all, I'm trying to test a 2 nodes cluster (RHCS U4) with apache and one monitored ip on eth1 (VIP 192.168.0.3), the hearthbeat is on eth0. When I unplug the cable (eth1) on active node, I get these errors: Nov 29 17:03:54 node1 clurgmgrd: [4368]: <info> Executing /etc/init.d/httpd status Nov 29 17:04:24 node1 clurgmgrd: [4368]: <info> Executing /etc/init.d/httpd status Nov 29 17:04:25 node1 kernel: tg3: eth1: Link is down. Nov 29 17:04:44 node1 clurgmgrd: [4368]: <warning> Link for eth1: Not detected Nov 29 17:04:44 node1 clurgmgrd: [4368]: <warning> No link on eth1... Nov 29 17:04:44 node1 clurgmgrd[4368]: <notice> status on ip "192.168.0.3" returned 1 (generic error) Nov 29 17:04:44 node1 clurgmgrd[4368]: <notice> Stopping service http Nov 29 17:04:44 node1 clurgmgrd: [4368]: <info> Executing /etc/init.d/httpd stop Nov 29 17:04:44 node1 httpd: httpd shutdown succeeded Nov 29 17:04:44 node1 clurgmgrd: [4368]: <info> Removing IPv4 address 192.168.0.3 from eth1 Nov 29 17:04:54 node1 clurgmgrd[4368]: <notice> Service http is recovering Nov 29 17:04:54 node1 clurgmgrd[4368]: <notice> Recovering failed service http Nov 29 17:04:54 node1 clurgmgrd: [4368]: <warning> Link for eth1: Not detected Nov 29 17:04:54 node1 clurgmgrd: [4368]: <info> Executing /etc/init.d/httpd start Nov 29 17:04:54 node1 httpd: httpd startup succeeded Nov 29 17:04:54 node1 clurgmgrd[4368]: <notice> Service http started Nov 29 17:05:04 node1 clurgmgrd: [4368]: <warning> 192.168.0.3 is not configured Nov 29 17:05:04 node1 clurgmgrd[4368]: <notice> status on ip "192.168.0.3" returned 1 (generic error) Nov 29 17:05:04 node1 clurgmgrd[4368]: <notice> Stopping service http Nov 29 17:05:04 node1 clurgmgrd: [4368]: <info> Executing /etc/init.d/httpd stop Nov 29 17:05:04 node1 httpd: httpd shutdown succeeded Nov 29 17:05:04 node1 clurgmgrd[4368]: <notice> Service http is recovering Nov 29 17:05:04 node1 clurgmgrd[4368]: <notice> Recovering failed service http Nov 29 17:05:04 node1 clurgmgrd: [4368]: <warning> Link for eth1: Not detected Nov 29 17:05:04 node1 clurgmgrd: [4368]: <info> Executing /etc/init.d/httpd start Nov 29 17:05:04 node1 httpd: httpd startup succeeded <...> and it restarts the service continously. It performs failover only if I modify recovery mode in cluster.conf: <service autostart="1" name="http" recovery="relocate"> Is there any way to set max number of retries before relocate service? Thanks Carlo -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
