isplist@xxxxxxxxxxxx wrote:
I want to use my brocade switch as the fencing device for my cluster. I
cannot find any documentation showing what I need to set up on the brocade
itself and within the cluster.conf file as well to make this work.
The system-config-cluster application supports brocade fencing. It is a
two part process - first you define the switch as a fence device; type
brocade, then you select a node an click "Manage fencing for this node"
and declare a fence instance.
Ah, I'm at the command line :).
So, there is nothing I need to do on the brocade itself then? The cluster
ports aren't connected directly, they are connected into a compaq hub, then
the hub is connected into the brocade. The brocade seems to know about the
external ports however since they are listed when I look on the switch.
As for the conf file, I've not found enough information on how to build a good
conf file so know this one is probably not even complete. Been working on
other parts of the problems then wanting to get to this.
Why build it yourself? The app will do it for you, and not make a typo
that could cost you valuable time. If you don't have X running on your
nodes, no problem - just install the s-c-cluster app anywhere...it will
let you configure a cluster and then save out the conf file which you
can propogate to the cluster yourself, if you want.
-J
<?xml version="1.0"?>
<cluster config_version="40" name="vgcomp">
<fence_daemon clean_start="1" post_fail_delay="0" post_join_delay="3"/>
<clusternodes>
<clusternode name="cweb92.companions.com" nodeid="92" votes="1"/>
<clusternode name="cweb93.companions.com" nodeid="93" votes="1"/>
<clusternode name="cweb94.companions.com" nodeid="94" votes="1"/>
<clusternode name="dev.companions.com" nodeid="99" votes="1"/>
<clusternode name="qm247.companions.com" nodeid="247" votes="1"/>
<clusternode name="qm248.companions.com" nodeid="248" votes="1"/>
<clusternode name="qm249.companions.com" nodeid="249" votes="1"/>
<clusternode name="qm250.companions.com" nodeid="250" votes="1"/>
</clusternodes>
<cman/>
<fencedevices>
<fencedevice agent="fence_brocade" ipaddr="x.x.x.x" login="xxx"
name="brocade" passwd="xxx"/>
</fencedevices>
<rm>
<failoverdomains/>
<resources/>
</rm>
</cluster>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
