>> I want to use my brocade switch as the fencing device for my cluster. I
>> cannot find any documentation showing what I need to set up on the brocade
>> itself and within the cluster.conf file as well to make this work.
> The system-config-cluster application supports brocade fencing. It is a
> two part process - first you define the switch as a fence device; type
> brocade, then you select a node an click "Manage fencing for this node"
> and declare a fence instance.
Ah, I'm at the command line :).
So, there is nothing I need to do on the brocade itself then? The cluster
ports aren't connected directly, they are connected into a compaq hub, then
the hub is connected into the brocade. The brocade seems to know about the
external ports however since they are listed when I look on the switch.
As for the conf file, I've not found enough information on how to build a good
conf file so know this one is probably not even complete. Been working on
other parts of the problems then wanting to get to this.
<?xml version="1.0"?>
<cluster config_version="40" name="vgcomp">
<fence_daemon clean_start="1" post_fail_delay="0" post_join_delay="3"/>
<clusternodes>
<clusternode name="cweb92.companions.com" nodeid="92" votes="1"/>
<clusternode name="cweb93.companions.com" nodeid="93" votes="1"/>
<clusternode name="cweb94.companions.com" nodeid="94" votes="1"/>
<clusternode name="dev.companions.com" nodeid="99" votes="1"/>
<clusternode name="qm247.companions.com" nodeid="247" votes="1"/>
<clusternode name="qm248.companions.com" nodeid="248" votes="1"/>
<clusternode name="qm249.companions.com" nodeid="249" votes="1"/>
<clusternode name="qm250.companions.com" nodeid="250" votes="1"/>
</clusternodes>
<cman/>
<fencedevices>
<fencedevice agent="fence_brocade" ipaddr="x.x.x.x" login="xxx"
name="brocade" passwd="xxx"/>
</fencedevices>
<rm>
<failoverdomains/>
<resources/>
</rm>
</cluster>
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
