sorry, i maanage to make it work only when cache enabled. Is it possible to do it with no cache ? On 11/29/05, Raz Ben-Jehuda(caro) <raziebe@xxxxxxxxx> wrote: > been there. > if i would load gnbd_serv with no cluster i would failed to export > any devices with gnbd_export. > if i join with: "cman_tool -X -e 2 join -c gamma -m 224.0.0.1 -i eth1" > and then gnbd_export hangs and dmeg reports > CMAN: Waiting to join or form a Linux-cluster > CMAN: forming a new cluster > CMANsendmsg failed: -22. > sometimes gnbd_export just says that ERROR create request failed : > Operation not supported: > So again i am stuck. > > On 11/28/05, David Teigland <teigland@xxxxxxxxxx> wrote: > > On Mon, Nov 28, 2005 at 08:07:47PM +0200, Raz Ben-Jehuda(caro) wrote: > > > tried it. > > > According to the min-gfs.txt at the GNBD server the only thing i have to do > > > is simly run gnbd_serv. but looking at the code i learned that i need > > > to load cman. > > > yet this is not enough. gnbd_serv fails to load with : > > > > > > gnbd_serv: ERROR cannot get node name : No such process > > > gnbd_serv: ERROR No cluster manager is running > > > gnbd_serv: ERROR If you are not planning to use a cluster manager, use -n > > > > > > does gnbd_serv depends in a cluster manager? > > > What is my mistake ? this is not part of the cluster. > > > > min-gfs.txt is wrong, I'll fix it. You need to use gnbd_serv -n. > > Then gnbd_serv will ignore all clustering stuff which is what you want. > > > > Dave > > > > > > > -- > Raz > -- Raz -- Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
