Re: rawdevice and syslog in the RHCS4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ajarbou

> Hi,
> In the RH AS 2.1 cluster and RHCS3's documentation there is a sections about
> the raw devices and the syslog configuration, but there is not any related
> information in RHCS4.
> My questions are:
> 1- Is it necessary to configure and start the rawdevices?

<Taken from Red Hat KB>

Red Hat Cluster Suite (RHCS), as of Red Hat Enterprise Linux 4, no
longer requires a quorum partition. The configuration file is kept
in /etc/cluster/cluster.conf. Every time a change is made to the
configuration using system-config-cluster, the "Send to Cluster" button
next to the filename should be selected. This will propagate the changes
across the cluster.

Note: CCSD is the daemon that handles the propagation of the
configuration file across the cluster.

</Taken from Red Hat KB>

> 2- How to pull the cluster error log to /var/log/cluster?
> 
> Note: I am running RHEL AS4 update2, and I've tried to edit the
> /etc/syslog.conf as follow (but without succeed):
> 
> ###vi /etc/syslog.conf
> 
> 
> ---------------------------------------------------------------
> # Log all kernel messages to the console.
> # Logging much else clutters up the screen.
> #kern.*                                                 /dev/console
> 
> # Log anything (except mail) of level info or higher.
> # Don't log private authentication messages!
> *.info;mail.none;news.none;authpriv.none;cron.none;local4.none
> /var/log/messages
> 
> # The authpriv file has restricted access.
> authpriv.*                                              /var/log/secure
> 
> # Log all the mail messages in one place.
> mail.*                                                  -/var/log/maillog
> 
> 
> # Log cron stuff
> cron.*                                                  /var/log/cron
> 
> # Everybody gets emergency messages
> *.emerg                                                 *
> 
> # Save news errors of level crit and higher in a special file.
> uucp,news.crit                                          /var/log/spooler
> 
> # Save boot messages also to boot.log
> local7.*                                                /var/log/boot.log
> 
> #
> # INN
> #
> news.=crit                                        /var/log/news/news.crit
> news.=err                                         /var/log/news/news.err
> news.notice                                       /var/log/news/news.notice
> 
> #
> local4.*                                               /var/log/cluster
> ----------------------------------------------------
> 
> 
> Regards,
> Ajarbou
> 
> 
> 
> 
> "Disclaimer by McAfee Web Shield e1000 Appliance"
> 
> This Outgoing Email has been scanned by King Abdul Aziz University SMTP Gateway Antivirus
> 
> --
> 
> Linux-cluster@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/linux-cluster

--

Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux