Hi, In the RH AS 2.1 cluster and RHCS3's documentation there is a sections about the raw devices and the syslog configuration, but there is not any related information in RHCS4. My questions are: 1- Is it necessary to configure and start the rawdevices? 2- How to pull the cluster error log to /var/log/cluster? Note: I am running RHEL AS4 update2, and I've tried to edit the /etc/syslog.conf as follow (but without succeed): ###vi /etc/syslog.conf --------------------------------------------------------------- # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;news.none;authpriv.none;cron.none;local4.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log # # INN # news.=crit /var/log/news/news.crit news.=err /var/log/news/news.err news.notice /var/log/news/news.notice # local4.* /var/log/cluster ---------------------------------------------------- Regards, Ajarbou "Disclaimer by McAfee Web Shield e1000 Appliance" This Outgoing Email has been scanned by King Abdul Aziz University SMTP Gateway Antivirus -- Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
