what
happens in gump:
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> find_root_by_ref
parameters:resources 134613668,groupname datamover
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> We are in
find_root_by_ref we enter the loop
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> 134642544
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> curr->r_rule->rr_root
== 0
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> 134617456
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> find_root_by_ref in
groups.c returned res 134617456
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> res_exec in restree.c
returned rv 0
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> res_exec in restree.c
returned rv 0
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> _res_op_by_level in
restree.c returned rv 0
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> res_start in groups.c
returned ret 0
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> group_op in rg_state.c
returned ret 0
Jun 20 11:30:11 gump clurgmgrd[7231]: <notice> Service datamover started
what happens in buba:
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> find_root_by_ref
parameters:resources 134613668,groupname datamover
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> We are in
find_root_by_ref we enter the loop
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> 134616568
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> curr->r_rule->rr_root
== 0
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> find_root_by_ref in
groups.c returned res 0
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> group_op in
rg_state.c returned ret -1
Jun 20 11:31:29 buba clurgmgrd[10706]: <warning> #68: Failed to start
datamover; return value: 1
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> Stopping service
datamover
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> find_root_by_ref
parameters:resources 134613668,groupname datamover
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> We are in
find_root_by_ref we enter the loop
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> 134616568
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> curr->r_rule->rr_root
== 0
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> find_root_by_ref in
groups.c returned res 0
Jun 20 11:31:29 buba clurgmgrd[10706]: <crit> #12: RG datamover
failed to stop; intervention required
Jun 20 11:31:29 buba clurgmgrd[10706]: <notice> Service datamover is
failed
Jun 20 11:31:29 buba clurgmgrd[10706]: <crit> #13: Service datamover
failed to stop cleanly
The reslist seems not to be the same in the two nodes,
I'll check my cluster.conf in my both nodes............
Sorry I'd better have waited before sending the previous mail:
the cluster.conf are identical.
So my question-> what does this lists represents, and what are the
files I have to check to see if there are identical
on my two nodes?
I have completely re installed buba (I formatted the root partition,
reinstalled the os, reinstalled the cluster kernel and userspace components)
and I have the same error. My question is not complicated: I want to
know that the
resource_t **reslist
in
find_root_by_ref
represents (comments: List of resources to traverse, ok but is the
resource list what you put in the cluster.conf between the
<resources><HERE?><resources/>?
Can anyone give me some clue to find why the program behaves differently
on the two nodes whereas the files
(cluster.conf, /usr/share/cluster/*.sh and the executables) are the same?
Here is my cluster.conf:
<?xml version="1.0"?>
<cluster name="cluster1" config_version="1">
<cman two_node="1" expected_votes="1">
</cman>
<clusternodes>
<clusternode name="buba_cluster" votes="1">
<fence>
<method name="single">
<device name="human" ipaddr="192.168.0.1"/>
</method>
</fence>
</clusternode>
<clusternode name="gump_cluster" votes="1">
<fence>
<method name="single">
<device name="human" ipaddr="192.168.0.2"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice name="human" agent="fence_manual"/>
</fencedevices>
<rm>
<failoverdomains>
<failoverdomain name="datamoverdomain">
<failoverdomainnode name="gump_cluster" priority="1"/>
<failoverdomainnode name="buba_cluster" priority="1"/>
</failoverdomain>
</failoverdomains>
<resources>
<script name="simple" file="/etc/init.d/simple"/>
</resources>
<resourcegroup name="datamover" domain="datamoverdomain">
<script ref="simple"/>
</resourcegroup>
</rm>
</cluster>
--
Linux-cluster@xxxxxxxxxx
http://www.redhat.com/mailman/listinfo/linux-cluster
