I couldn't see the zone entry in the 'zonegroup get' response. Updating the period and commiting it separately worked fine. Thank you so much! Best regards, Mahnoosh On Wed, 5 Mar 2025, 19:35 Shilpa Manjrabad Jagannath, <smanjara@xxxxxxxxxx> wrote: > On Wed, Mar 5, 2025 at 9:34 AM Adam Prycki <aprycki@xxxxxxxxxxxxx> wrote: > > > Hi, > > > > I've had similar issues before. > > radosgw-admin zonegroup/zone tooling is really bad in general. > > > > > > As far as I know you should remove zone before deleting it form > > zonegroup but I don't think I've ever managed to remove zone cleanly > > from the cluster. (I would be thankful if someone shared a correct way) > > (https://www.ibm.com/docs/en/storage-ceph/7?topic=zones-deleting-zone) > > > > To clean this up you may have to dump your zonegroup to file, edit json > > manually and upload it back to ceph without broken zone. > > > > If you have issues with deleting the zone itself from the local cluster > > RGW configuration you may have to hunt down objects containing it's IDs > > in .rgw.root pool. It's messy and dangerous so, don't forget to make a > > backup before you start ;) > > > > > > best regards, > > Adam > > > > > > W dniu 5.03.2025 o 18:02, Mahnoosh Shahidi pisze: > > > Hi everyone, > > > > > > We have a Ceph multisite setup with a zonegroup containing three zones: > > one > > > master and two secondary zones, one of which is designated as an > archive. > > > After recently upgrading to Ceph 19.2.1, I attempted to remove the > > archive > > > zone from the zonegroup following the steps in the Ceph documentation. > > > > > > I ran > > > radosgw-admin zonegroup remove --rgw-zonegroup=<ZONE_GROUP_NAME> > > > --rgw-zone=<ZONE_NAME> --rgw-realm=<REALM_NAME> > > > from the cluster containing the archive zone, followed by > > > radosgw-admin period update --commit --rgw-zonegroup=<ZONE_GROUP_NAME> > > > --rgw-zone=<ZONE_NAME> --rgw-realm=<REALM_NAME> > > > > > > However, the period update --commit command returns the error: > > > ERROR: zonegroup <zonegroup_id> does not contain zone id <zone_id> > > > The zone appears correctly in the zonegroup before the removal, and I > > > expected the archive zone to be successfully removed with the period > > update > > > committing without errors. > > > > > > Is there an additional step required, or could this be a bug related to > > > Ceph 19.2.1? Any guidance or assistance would be appreciated. Thank > you! > > > > > > > > it does appear to be a regression. have raised a tracker > https://tracker.ceph.com/issues/70323 > you don't see that zone entry when you run 'radosgw-admin zonegroup get' > command on the archive zone anymore, do you? > > what happens when you run 'radosgw-admin period update' and then > 'radosgw-admin period commit' separately? > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |