Thanks Robert (sorry about the delay in replying) :-)
On 29/02/2024 01:03, Robert W. Eckert wrote:
I have it working on my machines- the global configuration for me looks like
[global]
fsid = fe3a7cb0-69ca-11eb-8d45-c86000d08867
mon_host = [v2:192.168.2.142:3300/0,v1:192.168.2.142:6789/0] [v2:192.168.2.141:3300/0,v1:192.168.2.141:6789/0] [v2:192.168.2.199:3300/0,v1:192.168.2.199:6789/0]
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
The important thing for me was to add the FSID, and the auth sections
Also note the port is the 6789 not 3300.
-----Original Message-----
From: duluxoz<duluxoz@xxxxxxxxx>
Sent: Wednesday, February 28, 2024 4:05 AM
To:ceph-users@xxxxxxx
Subject: CephFS On Windows 10
Hi All,
I'm looking for some pointers/help as to why I can't get my Win10 PC to connect to our Ceph Cluster's CephFS Service. Details are as follows:
Ceph Cluster:
- IP Addresses: 192.168.1.10, 192.168.1.11, 192.168.1.12
- Each node above is a monitor & an MDS
- Firewall Ports: open (ie 3300, etc)
- CephFS System Name: my_cephfs
- Log files: nothing jumps out at me
Windows PC:
- Keyring file created and findable: ceph.client.me.keyring
- dokany installed
- ceph-for-windows installed
- Can ping all three ceph nodes
- Connection command: ceph-dokan -l v -o -id me --debug --client_fs my_cephfs -c C:\ProgramData\Ceph\ceph.conf
Ceph.conf contents:
~~~
[global]
mon_host = 192.168.1.10, 192.168.1.11, 192.168.1.12
log to stderr = true
log to syslog = true
run dir = C:/ProgramData/ceph
crash dir = C:/logs/ceph
debug client = 2
[client]
keyring = C:/ProgramData/ceph/ceph.client.me.keyring
log file = C:/logs/ceph/$name.$pid.log
admin socket = C:/ProgramData/ceph/$name.$pid.asok
~~~
Windows Logfile contents (ieC:/logs/ceph/client.me.NNNN.log):
~~~
2024-02-28T18:26:45.201+1100 1 0 monclient(hunting): authenticate timed out after 300
2024-02-28T18:31:45.203+1100 1 0 monclient(hunting): authenticate timed out after 300
2024-02-28T18:36:45.205+1100 1 0 monclient(hunting): authenticate timed out after 300
~~~
Additional info from Windows CLI:
~~~
failed to fetch mon config (--no-mon-config to skip)
~~~
So I've gone through the doco and done some Google-foo and I can't work out *why* I'm getting a failure; why I'm getting the authentication failure. I know it'll be something simple, something staring me in the face, but I'm at the point where I can't see the forest for the trees - please help.
Any help greatly appreciated
Thanks in advance
Cheers
Dulux-Oz
_______________________________________________
ceph-users mailing list --ceph-users@xxxxxxx To unsubscribe send an email toceph-users-leave@xxxxxxx
--
Peregrine IT Signature
*Matthew J BLACK*
M.Inf.Tech.(Data Comms)
MBA
B.Sc.
MACS (Snr), CP, IP3P
When you want it done /right/ ‒ the first time!
Phone: +61 4 0411 0089
Email: matthew@xxxxxxxxxxxxxxx <mailto:matthew@xxxxxxxxxxxxxxx>
Web: www.peregrineit.net <http://www.peregrineit.net>
View Matthew J BLACK's profile on LinkedIn
<http://au.linkedin.com/in/mjblack>
This Email is intended only for the addressee. Its use is limited to
that intended by the author at the time and it is not to be distributed
without the author’s consent. You must not use or disclose the contents
of this Email, or add the sender’s Email address to any database, list
or mailing list unless you are expressly authorised to do so. Unless
otherwise stated, Peregrine I.T. Pty Ltd accepts no liability for the
contents of this Email except where subsequently confirmed in
writing. The opinions expressed in this Email are those of the author
and do not necessarily represent the views of Peregrine I.T. Pty
Ltd. This Email is confidential and may be subject to a claim of legal
privilege.
If you have received this Email in error, please notify the author and
delete this message immediately.
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
