Re: Scrub stuck and 'pg has invalid (post-split) stat'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please don't drop the list from your response.

The first question coming to mind is, why do you have a cache-tier if all your pools are on nvme decices anyway? I don't see any benefit here.
Did you try the suggested workaround and disable the cache-tier?

Zitat von Cedric <yipikai7@xxxxxxxxx>:

Thanks Eugen, see attached infos.

Some more details:

- commands that actually hangs: ceph balancer status ; rbd -p vms ls ;
rados -p vms_cache cache-flush-evict-all
- all scrub running on vms_caches pgs are stall / start in a loop
without actually doing anything
- all io are 0 both from ceph status or iostat on nodes

On Tue, Feb 20, 2024 at 10:00 AM Eugen Block <eblock@xxxxxx> wrote:

Hi,

some more details would be helpful, for example what's the pool size
of the cache pool? Did you issue a PG split before or during the
upgrade? This thread [1] deals with the same problem, the described
workaround was to set hit_set_count to 0 and disable the cache layer
until that is resolved. Afterwards you could enable the cache layer
again. But keep in mind that the code for cache tier is entirely
removed in Reef (IIRC).

Regards,
Eugen

[1]
https://ceph-users.ceph.narkive.com/zChyOq5D/ceph-strange-issue-after-adding-a-cache-osd

Zitat von Cedric <yipikai7@xxxxxxxxx>:

> Hello,
>
> Following an upgrade from Nautilus (14.2.22) to Pacific (16.2.13), we
> encounter an issue with a cache pool becoming completely stuck,
> relevant messages below:
>
> pg xx.x has invalid (post-split) stats; must scrub before tier agent
> can activate
>
> In OSD logs, scrubs are starting in a loop without succeeding for all
> pg of this pool.
>
> What we already tried without luck so far:
>
> - shutdown / restart OSD
> - rebalance pg between OSD
> - raise the memory on OSD
> - repeer PG
>
> Any idea what is causing this? any help will be greatly appreciated
>
> Thanks
>
> Cédric
> _______________________________________________
> ceph-users mailing list -- ceph-users@xxxxxxx
> To unsubscribe send an email to ceph-users-leave@xxxxxxx


_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx


_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux