Are you aware of any config item that can be set (perhaps in the ceph.conf or config db) so the limit is enforced immediately at creation time without needing to set it for each rbd? Respectfully, *Wes Dillingham* wes@xxxxxxxxxxxxxxxxx LinkedIn <http://www.linkedin.com/in/wesleydillingham> On Wed, Nov 15, 2023 at 1:14 PM David C. <david.casier@xxxxxxxx> wrote: > rbd create testpool/test3 --size=100M > rbd snap limit set testpool/test3 --limit 3 > > > Le mer. 15 nov. 2023 à 17:58, Wesley Dillingham <wes@xxxxxxxxxxxxxxxxx> a > écrit : > >> looking into how to limit snapshots at the ceph level for RBD snapshots. >> Ideally ceph would enforce an arbitrary number of snapshots allowable per >> rbd. >> >> Reading the man page for rbd command I see this option: >> https://docs.ceph.com/en/quincy/man/8/rbd/#cmdoption-rbd-limit >> >> --limit >> >> Specifies the limit for the number of snapshots permitted. >> >> Seems perfect. But on attempting to use it as such I get an error: >> >> admin@rbdtest:~$ rbd create testpool/test3 --size=100M --limit=3 >> rbd: unrecognised option '--limit=3' >> >> Where am I going wrong here? Is there another way to enforce a limit of >> snapshots for RBD? Thanks. >> >> Respectfully, >> >> *Wes Dillingham* >> wes@xxxxxxxxxxxxxxxxx >> LinkedIn <http://www.linkedin.com/in/wesleydillingham> >> _______________________________________________ >> ceph-users mailing list -- ceph-users@xxxxxxx >> To unsubscribe send an email to ceph-users-leave@xxxxxxx >> > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |