Re: [EXTERNAL] [Pacific] ceph orch device ls do not returns any HDD

[Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>]

Hi all,

I'm trying to catch the faulty commit. I'm able to build Ceph from the 
git repo in a fresh podman container but at this time, the lsblk command 
returns nothing in my container.
In ceph containers lsblk works
So something is wrong with launching my podman container (or different 
from launching ceph containers) and I cannot find what.

Any help about this step ?

Thanks

Patrick


Le 13/10/2023 à 09:18, Eugen Block a écrit :
> Trying to resend with the attachment.
> I can't really find anything suspicious, ceph-volume (16.2.11) does 
> recognize /dev/sdc though:
>
> [2023-10-12 08:58:14,135][ceph_volume.process][INFO  ] stdout 
> NAME="sdc" KNAME="sdc" PKNAME="" MAJ:MIN="8:32" FSTYPE="" 
> MOUNTPOINT="" LABEL="" UUID="" RO="0" RM="1" MODEL="SAMSUNG HE253GJ " 
> SIZE="232.9G" STATE="running" OWNER="root" GROUP="disk" 
> MODE="brw-rw----" ALIGNMENT="0" PHY-SEC="512" LOG-SEC="512" ROTA="1" 
> SCHED="mq-deadline" TYPE="disk" DISC-ALN="0" DISC-GRAN="0B" 
> DISC-MAX="0B" DISC-ZERO="0" PKNAME="" PARTLABEL=""
> [2023-10-12 08:58:14,139][ceph_volume.util.system][INFO  ] Executable 
> pvs found on the host, will use /sbin/pvs
> [2023-10-12 08:58:14,140][ceph_volume.process][INFO  ] Running 
> command: nsenter --mount=/rootfs/proc/1/ns/mnt 
> --ipc=/rootfs/proc/1/ns/ipc --net=/rootfs/proc/1/ns/net 
> --uts=/rootfs/proc/1/ns/uts /sbin/pvs --noheadings --readonly 
> --units=b --nosuffix --separator=";" -o 
> pv_name,vg_name,pv_count,lv_count,vg_attr,vg_extent_count,vg_free_count,vg_extent_size
>
> But apparently it just stops after that. I already tried to find a 
> debug log-level for ceph-volume but it's not applicable to all 
> subcommands.
> The cephadm.log also just stops without even finishing the "copying 
> blob", which makes me wonder if it actually pulls the entire image? I 
> assume you have enough free disk space (otherwise I would expect a 
> message "failed to pull target image"), do you see any other warnings 
> in syslog or something? Or are the logs incomplete?
> Maybe someone else finds any clues in the logs...
>
> Regards,
> Eugen
>
> Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
>
> > Hi Eugen,
> >
> > You will find in attachment cephadm.log and cepĥ-volume.log. Each 
> > contains the outputs for the 2 versions.  v16.2.10-20220920 is really 
> > more verbose or v16.2.11-20230125 does not execute all the detection 
> > process
> >
> > Patrick
> >
> >
> > Le 12/10/2023 à 09:34, Eugen Block a écrit :
> > > Good catch, and I found the thread I had in my mind, it was this 
> > > exact one. :-D Anyway, can you share the ceph-volume.log from the 
> > > working and the not working attempt?
> > > I tried to look for something significant in the pacific release 
> > > notes for 16.2.11, and there were some changes to ceph-volume, but 
> > > I'm not sure what it could be.
> > >
> > > Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
> > >
> > > > I've ran additional tests with Pacific releases and with 
> > > > "ceph-volume inventory" things went wrong with the first v16.11 
> > > > release (v16.2.11-20230125)
> > > >
> > > > =================== Ceph v16.2.10-20220920 =======================
> > > >
> > > > Device Path               Size         rotates available Model name
> > > > /dev/sdc                  232.83 GB    True    True SAMSUNG HE253GJ
> > > > /dev/sda                  232.83 GB    True    False SAMSUNG HE253GJ
> > > > /dev/sdb                  465.76 GB    True    False     WDC 
> > > > WD5003ABYX-1
> > > >
> > > > =================== Ceph v16.2.11-20230125 =======================
> > > >
> > > > Device Path               Size         Device nodes rotates 
> > > > available Model name
> > > >
> > > >
> > > > May be this could help to see what has changed ?
> > > >
> > > > Patrick
> > > >
> > > > Le 11/10/2023 à 17:38, Eugen Block a écrit :
> > > > > That's really strange. Just out of curiosity, have you tried 
> > > > > Quincy (and/or Reef) as well? I don't recall what inventory does 
> > > > > in the background exactly, I believe Adam King mentioned that in 
> > > > > some thread, maybe that can help here. I'll search for that thread 
> > > > > tomorrow.
> > > > >
> > > > > Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
> > > > >
> > > > > > Hi Eugen,
> > > > > >
> > > > > > [root@mostha1 ~]# rpm -q cephadm
> > > > > > cephadm-16.2.14-0.el8.noarch
> > > > > >
> > > > > > Log associated to the
> > > > > >
> > > > > > 2023-10-11 16:16:02,167 7f820515fb80 DEBUG 
> > > > > > --------------------------------------------------------------------------------
> > > > > > cephadm ['gather-facts']
> > > > > > 2023-10-11 16:16:02,208 7f820515fb80 DEBUG /bin/podman: 4.4.1
> > > > > > 2023-10-11 16:16:02,313 7f820515fb80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:02,317 7f820515fb80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:02,322 7f820515fb80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:02,326 7f820515fb80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:02,329 7f820515fb80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:02,333 7f820515fb80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:04,474 7ff2a5c08b80 DEBUG 
> > > > > > --------------------------------------------------------------------------------
> > > > > > cephadm ['ceph-volume', 'inventory']
> > > > > > 2023-10-11 16:16:04,516 7ff2a5c08b80 DEBUG /usr/bin/podman: 4.4.1
> > > > > > 2023-10-11 16:16:04,520 7ff2a5c08b80 DEBUG Using default config: 
> > > > > > /etc/ceph/ceph.conf
> > > > > > 2023-10-11 16:16:04,573 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 0d28d71358d7,445.8MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 2084faaf4d54,13.27MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 61073c53805d,512.7MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 6b9f0b72d668,361.1MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 7493a28808ad,163.7MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > a89672a3accf,59.22MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > b45271cc9726,54.24MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > e00ec13ab138,707.3MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > fcb1e1a6b08d,35.55MB / 50.32GB
> > > > > > 2023-10-11 16:16:04,630 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 0d28d71358d7,1.28%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 2084faaf4d54,0.00%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 61073c53805d,1.19%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 6b9f0b72d668,1.03%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > 7493a28808ad,0.78%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > a89672a3accf,0.11%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > b45271cc9726,1.35%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > e00ec13ab138,0.43%
> > > > > > 2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > fcb1e1a6b08d,0.02%
> > > > > > 2023-10-11 16:16:04,634 7ff2a5c08b80 INFO Inferring fsid 
> > > > > > 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > 2023-10-11 16:16:04,691 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e 
> > > > > > 2023-10-11 16:16:04,692 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > quay.io/ceph/ceph@sha256:c08064dde4bba4e72a1f55d90ca32df9ef5aafab82efe2e0a0722444a5aaacca 
> > > > > > 2023-10-11 16:16:04,692 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > docker.io/ceph/ceph@sha256:056637972a107df4096f10951e4216b21fcd8ae0b9fb4552e628d35df3f61139 
> > > > > > 2023-10-11 16:16:04,694 7ff2a5c08b80 INFO Using recent ceph image 
> > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
> > > > > > 2023-10-11 16:16:05,094 7ff2a5c08b80 DEBUG stat: 167 167
> > > > > > 2023-10-11 16:16:05,903 7ff2a5c08b80 DEBUG Acquiring lock 
> > > > > > 140679815723776 on 
> > > > > > /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
> > > > > > 2023-10-11 16:16:05,903 7ff2a5c08b80 DEBUG Lock 140679815723776 
> > > > > > acquired on /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
> > > > > > 2023-10-11 16:16:05,929 7ff2a5c08b80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:05,933 7ff2a5c08b80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:16:06,700 7ff2a5c08b80 DEBUG /usr/bin/podman:
> > > > > > 2023-10-11 16:16:06,701 7ff2a5c08b80 DEBUG /usr/bin/podman: 
> > > > > > Device Path               Size Device nodes rotates available 
> > > > > > Model name
> > > > > >
> > > > > >
> > > > > > I have only one version of cephadm in /var/lib/ceph/{fsid} :
> > > > > > [root@mostha1 ~]# ls -lrt 
> > > > > > /var/lib/ceph/250f9864-0142-11ee-8e5f-00266cf8869c/cephadm*
> > > > > > -rw-r--r-- 1 root root 350889 28 sept. 16:39 
> > > > > > /var/lib/ceph/250f9864-0142-11ee-8e5f-00266cf8869c/cephadm.f6868821c084cd9740b59c7c5eb59f0dd47f6e3b1e6fecb542cb44134ace8d78
> > > > > >
> > > > > >
> > > > > > Running " python3 
> > > > > > /var/lib/ceph/250f9864-0142-11ee-8e5f-00266cf8869c/cephadm.f6868821c084cd9740b59c7c5eb59f0dd47f6e3b1e6fecb542cb44134ace8d78 
> > > > > > ceph-volume inventory" give the same output and the same log 
> > > > > > (execpt the valu of the lock):
> > > > > >
> > > > > > 2023-10-11 16:21:35,965 7f467cf31b80 DEBUG 
> > > > > > --------------------------------------------------------------------------------
> > > > > > cephadm ['ceph-volume', 'inventory']
> > > > > > 2023-10-11 16:21:36,009 7f467cf31b80 DEBUG /usr/bin/podman: 4.4.1
> > > > > > 2023-10-11 16:21:36,012 7f467cf31b80 DEBUG Using default config: 
> > > > > > /etc/ceph/ceph.conf
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 0d28d71358d7,452.1MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 2084faaf4d54,13.27MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 61073c53805d,513.6MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 6b9f0b72d668,322.4MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 7493a28808ad,164MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > a89672a3accf,58.5MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > b45271cc9726,54.69MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > e00ec13ab138,707.1MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,068 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > fcb1e1a6b08d,36.28MB / 50.32GB
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 0d28d71358d7,1.27%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 2084faaf4d54,0.00%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 61073c53805d,1.16%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 6b9f0b72d668,1.02%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > 7493a28808ad,0.78%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > a89672a3accf,0.11%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > b45271cc9726,1.35%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > e00ec13ab138,0.41%
> > > > > > 2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > fcb1e1a6b08d,0.02%
> > > > > > 2023-10-11 16:21:36,128 7f467cf31b80 INFO Inferring fsid 
> > > > > > 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > 2023-10-11 16:21:36,186 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e 
> > > > > > 2023-10-11 16:21:36,187 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > quay.io/ceph/ceph@sha256:c08064dde4bba4e72a1f55d90ca32df9ef5aafab82efe2e0a0722444a5aaacca 
> > > > > > 2023-10-11 16:21:36,187 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > docker.io/ceph/ceph@sha256:056637972a107df4096f10951e4216b21fcd8ae0b9fb4552e628d35df3f61139 
> > > > > > 2023-10-11 16:21:36,189 7f467cf31b80 INFO Using recent ceph image 
> > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
> > > > > > 2023-10-11 16:21:36,549 7f467cf31b80 DEBUG stat: 167 167
> > > > > > 2023-10-11 16:21:36,942 7f467cf31b80 DEBUG Acquiring lock 
> > > > > > 139940396923424 on 
> > > > > > /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
> > > > > > 2023-10-11 16:21:36,942 7f467cf31b80 DEBUG Lock 139940396923424 
> > > > > > acquired on /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
> > > > > > 2023-10-11 16:21:36,969 7f467cf31b80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:21:36,972 7f467cf31b80 DEBUG sestatus: SELinux 
> > > > > > status:                 disabled
> > > > > > 2023-10-11 16:21:37,749 7f467cf31b80 DEBUG /usr/bin/podman:
> > > > > > 2023-10-11 16:21:37,750 7f467cf31b80 DEBUG /usr/bin/podman: 
> > > > > > Device Path               Size Device nodes rotates available 
> > > > > > Model name
> > > > > >
> > > > > > Patrick
> > > > > >
> > > > > > Le 11/10/2023 à 15:59, Eugen Block a écrit :
> > > > > > > Can you check which cephadm version is installed on the host? 
> > > > > > > And then please add (only the relevant) output from the 
> > > > > > > cephadm.log when you run the inventory (without the --image 
> > > > > > > <octopus>). Sometimes the version mismatch on the host and the 
> > > > > > > one the orchestrator uses can cause some disruptions. You could 
> > > > > > > try the same with the latest cephadm you have in 
> > > > > > > /var/lib/ceph/${fsid}/ (ls -lrt 
> > > > > > > /var/lib/ceph/${fsid}/cephadm.*). I mentioned that in this 
> > > > > > > thread [1]. So you could try the following:
> > > > > > >
> > > > > > > $ chmod +x /var/lib/ceph/{fsid}/cephadm.{latest}
> > > > > > >
> > > > > > > $ python3 /var/lib/ceph/{fsid}/cephadm.{latest} ceph-volume 
> > > > > > > inventory
> > > > > > >
> > > > > > > Does the output differ? Paste the relevant cephadm.log from that 
> > > > > > > attempt as well.
> > > > > > >
> > > > > > > [1] 
> > > > > > > https://lists.ceph.io/hyperkitty/list/ceph-users@xxxxxxx/thread/LASBJCSPFGDYAWPVE2YLV2ZLF3HC5SLS/
> > > > > > >
> > > > > > > Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
> > > > > > >
> > > > > > > > Hi Eugen,
> > > > > > > >
> > > > > > > > first many thanks for the time spent on this problem.
> > > > > > > >
> > > > > > > > "ceph osd purge 2 --force --yes-i-really-mean-it" works and 
> > > > > > > > clean all the bas status.
> > > > > > > >
> > > > > > > > *[root@mostha1 ~]# cephadm shell
> > > > > > > > *Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > > > Using recent ceph image 
> > > > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
> > > > > > > > *
> > > > > > > > *
> > > > > > > > *[ceph: root@mostha1 /]# ceph osd purge 2 --force 
> > > > > > > > --yes-i-really-mean-it *
> > > > > > > > purged osd.2
> > > > > > > > *
> > > > > > > > *
> > > > > > > > *[ceph: root@mostha1 /]# ceph osd tree*
> > > > > > > > ID  CLASS  WEIGHT   TYPE NAME         STATUS REWEIGHT PRI-AFF
> > > > > > > > -1         1.72823  root default
> > > > > > > > -5         0.45477      host dean
> > > > > > > >  0    hdd  0.22739          osd.0         up 1.00000 1.00000
> > > > > > > >  4    hdd  0.22739          osd.4         up 1.00000 1.00000
> > > > > > > > -9         0.22739      host ekman
> > > > > > > >  6    hdd  0.22739          osd.6         up 1.00000 1.00000
> > > > > > > > -7         0.45479      host mostha1
> > > > > > > >  5    hdd  0.45479          osd.5         up 1.00000 1.00000
> > > > > > > > -3         0.59128      host mostha2
> > > > > > > >  1    hdd  0.22739          osd.1         up 1.00000 1.00000
> > > > > > > >  3    hdd  0.36389          osd.3         up 1.00000 1.00000
> > > > > > > > *
> > > > > > > > *
> > > > > > > > *[ceph: root@mostha1 /]# lsblk*
> > > > > > > > NAME MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
> > > > > > > > sda 8:0    1 232.9G  0 disk
> > > > > > > > |-sda1 8:1    1   3.9G  0 part /rootfs/boot
> > > > > > > > |-sda2 8:2    1   3.9G  0 part [SWAP]
> > > > > > > > `-sda3 8:3    1   225G  0 part
> > > > > > > > |-al8vg-rootvol 253:0    0  48.8G  0 lvm  /rootfs
> > > > > > > > |-al8vg-homevol 253:2    0   9.8G  0 lvm /rootfs/home
> > > > > > > > |-al8vg-tmpvol 253:3    0   9.8G  0 lvm  /rootfs/tmp
> > > > > > > > `-al8vg-varvol 253:4    0  19.8G  0 lvm  /rootfs/var
> > > > > > > > sdb 8:16   1 465.8G  0 disk
> > > > > > > > `-ceph--08827fdc--136e--4070--97e9--e5e8b3970766-osd--block--7dec1808--d6f4--4f90--ac74--75a4346e1df5 
> > > > > > > > 253:1    0 465.8G  0 lvm
> > > > > > > > sdc 8:32   1 232.9G  0 disk
> > > > > > > >
> > > > > > > > "cephadm ceph-volume inventory" returns nothing:
> > > > > > > >
> > > > > > > > *[root@mostha1 ~]# cephadm ceph-volume inventory **
> > > > > > > > *Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > > > Using recent ceph image 
> > > > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
> > > > > > > >
> > > > > > > > Device Path               Size         Device nodes rotates 
> > > > > > > > available Model name
> > > > > > > >
> > > > > > > > [root@mostha1 ~]#
> > > > > > > >
> > > > > > > > But running the same command within cephadm 15.2.17 works:
> > > > > > > >
> > > > > > > > *[root@mostha1 ~]# cephadm --image 93146564743f ceph-volume 
> > > > > > > > inventory*
> > > > > > > > Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > > >
> > > > > > > > Device Path               Size         rotates available Model 
> > > > > > > > name
> > > > > > > > /dev/sdc                  232.83 GB    True    True SAMSUNG 
> > > > > > > > HE253GJ
> > > > > > > > /dev/sda                  232.83 GB    True    False SAMSUNG 
> > > > > > > > HE253GJ
> > > > > > > > /dev/sdb                  465.76 GB    True    False WDC 
> > > > > > > > WD5003ABYX-1
> > > > > > > >
> > > > > > > > [root@mostha1 ~]#
> > > > > > > >
> > > > > > > > *[root@mostha1 ~]# podman images -a**
> > > > > > > > *REPOSITORY                        TAG         IMAGE ID 
> > > > > > > > CREATED        SIZE
> > > > > > > > quay.io/ceph/ceph                 v16.2.14 f13d80acdbb5 2 weeks 
> > > > > > > > ago    1.21 GB
> > > > > > > > quay.io/ceph/ceph                 v15.2.17 93146564743f 14 
> > > > > > > > months ago  1.24 GB
> > > > > > > > ....
> > > > > > > >
> > > > > > > >
> > > > > > > > Patrick
> > > > > > > >
> > > > > > > > Le 11/10/2023 à 15:14, Eugen Block a écrit :
> > > > > > > > > Your response is a bit confusing since it seems to be mixed up 
> > > > > > > > > with the previous answer. So you still need to remove the OSD 
> > > > > > > > > properly, so purge it from the crush tree:
> > > > > > > > >
> > > > > > > > > ceph osd purge 2 --force --yes-i-really-mean-it (only in a 
> > > > > > > > > test cluster!)
> > > > > > > > >
> > > > > > > > > If everything is clean (OSD has been removed, disk has been 
> > > > > > > > > zapped, lsblk shows no LVs for that disk) you can check the 
> > > > > > > > > inventory:
> > > > > > > > >
> > > > > > > > > cephadm ceph-volume inventory
> > > > > > > > >
> > > > > > > > > Please also add the output of 'ceph orch ls osd --export'.
> > > > > > > > >
> > > > > > > > > Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
> > > > > > > > >
> > > > > > > > > > Hi Eugen,
> > > > > > > > > >
> > > > > > > > > > - the OS is Alma Linux 8 with latests updates.
> > > > > > > > > >
> > > > > > > > > > - this morning I've worked with ceph-volume but it ends with 
> > > > > > > > > > a strange final state. I was connected on host mostha1 where 
> > > > > > > > > > /dev/sdc was not reconized. These are the steps followed 
> > > > > > > > > > based on the ceph-volume documentation I've read:
> > > > > > > > > > [root@mostha1 ~]# cephadm shell
> > > > > > > > > > [ceph: root@mostha1 /]# ceph auth get client.bootstrap-osd > 
> > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring
> > > > > > > > > > [ceph: root@mostha1 /]# ceph-volume lvm prepare --bluestore 
> > > > > > > > > > --data /dev/sdc
> > > > > > > > > >
> > > > > > > > > > Now lsblk command shows sdc as an osd:
> > > > > > > > > > ....
> > > > > > > > > > sdb 8:16   1 465.8G  0 disk
> > > > > > > > > > `-ceph--08827fdc--136e--4070--97e9--e5e8b3970766-osd--block--7dec1808--d6f4--4f90--ac74--75a4346e1df5 
> > > > > > > > > > 253:1    0 465.8G  0 lvm
> > > > > > > > > > sdc 8:32   1 232.9G  0 disk
> > > > > > > > > > `-ceph--b27d7a07--278d--4ee2--b84e--53256ef8de4c-osd--block--45c8e92c--caf9--4fe7--9a42--7b45a0794632 
> > > > > > > > > > 253:5    0 232.8G  0 lvm
> > > > > > > > > >
> > > > > > > > > > Then I've tried to activate this osd but it fails as in 
> > > > > > > > > > podman I have not access to systemctl:
> > > > > > > > > >
> > > > > > > > > > [ceph: root@mostha1 /]# ceph-volume lvm activate 2 
> > > > > > > > > > 45c8e92c-caf9-4fe7-9a42-7b45a0794632
> > > > > > > > > > .....
> > > > > > > > > > Running command: /usr/bin/systemctl start ceph-osd@2
> > > > > > > > > >  stderr: Failed to connect to bus: No such file or directory
> > > > > > > > > > -->  RuntimeError: command returned non-zero exit status: 1
> > > > > > > > > > [ceph: root@mostha1 /]# ceph osd tree
> > > > > > > > > >
> > > > > > > > > > And now I have now I have a strange status for this osd.2:
> > > > > > > > > >
> > > > > > > > > > [ceph: root@mostha1 /]# ceph osd tree
> > > > > > > > > > ID  CLASS  WEIGHT   TYPE NAME         STATUS REWEIGHT PRI-AFF
> > > > > > > > > > -1         1.72823  root default
> > > > > > > > > > -5         0.45477      host dean
> > > > > > > > > >  0    hdd  0.22739          osd.0         up 1.00000 1.00000
> > > > > > > > > >  4    hdd  0.22739          osd.4         up 1.00000 1.00000
> > > > > > > > > > -9         0.22739      host ekman
> > > > > > > > > >  6    hdd  0.22739          osd.6         up 1.00000 1.00000
> > > > > > > > > > -7         0.45479      host mostha1
> > > > > > > > > >  5    hdd  0.45479          osd.5         up 1.00000 1.00000
> > > > > > > > > > -3         0.59128      host mostha2
> > > > > > > > > >  1    hdd  0.22739          osd.1         up 1.00000 1.00000
> > > > > > > > > >  3    hdd  0.36389          osd.3         up 1.00000 1.00000
> > > > > > > > > >  2               0  osd.2               down 0 1.00000
> > > > > > > > > >
> > > > > > > > > > I've tried to destroy the osd as you suggest but even if the 
> > > > > > > > > > command returns no error I still have this osd even if 
> > > > > > > > > > "lsblk" do not show any more /dev/sdc as a ceph osd device.
> > > > > > > > > >
> > > > > > > > > > *[ceph: root@mostha1 /]# ceph-volume lvm zap --destroy 
> > > > > > > > > > /dev/sdc**
> > > > > > > > > > *--> Zapping: /dev/sdc
> > > > > > > > > > --> Zapping lvm member /dev/sdc. lv_path is 
> > > > > > > > > > /dev/ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c/osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632
> > > > > > > > > > --> Unmounting /var/lib/ceph/osd/ceph-2
> > > > > > > > > > Running command: /usr/bin/umount -v /var/lib/ceph/osd/ceph-2
> > > > > > > > > >  stderr: umount: /var/lib/ceph/osd/ceph-2 unmounted
> > > > > > > > > > Running command: /usr/bin/dd if=/dev/zero 
> > > > > > > > > > of=/dev/ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c/osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632 
> > > > > > > > > > bs=1M count=10 conv=fsync
> > > > > > > > > >  stderr: 10+0 records in
> > > > > > > > > > 10+0 records out
> > > > > > > > > > 10485760 bytes (10 MB, 10 MiB) copied, 0.575633 s, 18.2 MB/s
> > > > > > > > > > --> Only 1 LV left in VG, will proceed to destroy volume 
> > > > > > > > > > group ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c
> > > > > > > > > > Running command: nsenter --mount=/rootfs/proc/1/ns/mnt 
> > > > > > > > > > --ipc=/rootfs/proc/1/ns/ipc --net=/rootfs/proc/1/ns/net 
> > > > > > > > > > --uts=/rootfs/proc/1/ns/uts /sbin/vgremove -v -f 
> > > > > > > > > > ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c
> > > > > > > > > >  stderr: Removing 
> > > > > > > > > > ceph--b27d7a07--278d--4ee2--b84e--53256ef8de4c-osd--block--45c8e92c--caf9--4fe7--9a42--7b45a0794632 
> > > > > > > > > > (253:1)
> > > > > > > > > >  stderr: Releasing logical volume 
> > > > > > > > > > "osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632"
> > > > > > > > > >  stderr: Archiving volume group 
> > > > > > > > > > "ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c" metadata (seqno 5).
> > > > > > > > > >  stdout: Logical volume 
> > > > > > > > > > "osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632" successfully 
> > > > > > > > > > removed.
> > > > > > > > > >  stderr: Removing physical volume "/dev/sdc" from volume 
> > > > > > > > > > group "ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c"
> > > > > > > > > >  stdout: Volume group 
> > > > > > > > > > "ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c" successfully removed
> > > > > > > > > >  stderr: Creating volume group backup 
> > > > > > > > > > "/etc/lvm/backup/ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c" 
> > > > > > > > > > (seqno 6).
> > > > > > > > > > Running command: nsenter --mount=/rootfs/proc/1/ns/mnt 
> > > > > > > > > > --ipc=/rootfs/proc/1/ns/ipc --net=/rootfs/proc/1/ns/net 
> > > > > > > > > > --uts=/rootfs/proc/1/ns/uts /sbin/pvremove -v -f -f /dev/sdc
> > > > > > > > > >  stdout: Labels on physical volume "/dev/sdc" successfully 
> > > > > > > > > > wiped.
> > > > > > > > > > Running command: /usr/bin/dd if=/dev/zero of=/dev/sdc bs=1M 
> > > > > > > > > > count=10 conv=fsync
> > > > > > > > > >  stderr: 10+0 records in
> > > > > > > > > > 10+0 records out
> > > > > > > > > > 10485760 bytes (10 MB, 10 MiB) copied, 0.590652 s, 17.8 MB/s
> > > > > > > > > > *--> Zapping successful for: <Raw Device: /dev/sdc>*
> > > > > > > > > > *
> > > > > > > > > > *
> > > > > > > > > > *[ceph: root@mostha1 /]# ceph osd tree**
> > > > > > > > > > *ID  CLASS  WEIGHT   TYPE NAME         STATUS REWEIGHT PRI-AFF
> > > > > > > > > > -1         1.72823  root default
> > > > > > > > > > -5         0.45477      host dean
> > > > > > > > > >  0    hdd  0.22739          osd.0         up 1.00000 1.00000
> > > > > > > > > >  4    hdd  0.22739          osd.4         up 1.00000 1.00000
> > > > > > > > > > -9         0.22739      host ekman
> > > > > > > > > >  6    hdd  0.22739          osd.6         up 1.00000 1.00000
> > > > > > > > > > -7         0.45479      host mostha1
> > > > > > > > > >  5    hdd  0.45479          osd.5         up 1.00000 1.00000
> > > > > > > > > > -3         0.59128      host mostha2
> > > > > > > > > >  1    hdd  0.22739          osd.1         up 1.00000 1.00000
> > > > > > > > > >  3    hdd  0.36389          osd.3         up 1.00000 1.00000
> > > > > > > > > >  2               0  osd.2               down 0 1.00000
> > > > > > > > > > *
> > > > > > > > > > *
> > > > > > > > > > *[ceph: root@mostha1 /]# lsblk**
> > > > > > > > > > *NAME MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
> > > > > > > > > > sda 8:0    1 232.9G  0 disk
> > > > > > > > > > |-sda1 8:1    1   3.9G  0 part /rootfs/boot
> > > > > > > > > > |-sda2 8:2    1   3.9G  0 part [SWAP]
> > > > > > > > > > `-sda3 8:3    1   225G  0 part
> > > > > > > > > > |-al8vg-rootvol 253:0    0  48.8G  0 lvm /rootfs
> > > > > > > > > > |-al8vg-homevol 253:3    0   9.8G  0 lvm /rootfs/home
> > > > > > > > > > |-al8vg-tmpvol 253:4    0   9.8G  0 lvm /rootfs/tmp
> > > > > > > > > > `-al8vg-varvol 253:5    0  19.8G  0 lvm /rootfs/var
> > > > > > > > > > sdb 8:16   1 465.8G  0 disk
> > > > > > > > > > `-ceph--08827fdc--136e--4070--97e9--e5e8b3970766-osd--block--7dec1808--d6f4--4f90--ac74--75a4346e1df5 
> > > > > > > > > > 253:2    0 465.8G  0 lvm
> > > > > > > > > > *sdc *
> > > > > > > > > >
> > > > > > > > > > Patrick
> > > > > > > > > > Le 11/10/2023 à 11:00, Eugen Block a écrit :
> > > > > > > > > > > Hi,
> > > > > > > > > > >
> > > > > > > > > > > just wondering if 'ceph-volume lvm zap --destroy /dev/sdc' 
> > > > > > > > > > > would help here. From your previous output you didn't 
> > > > > > > > > > > specify the --destroy flag.
> > > > > > > > > > > Which cephadm version is installed on the host? Did you also 
> > > > > > > > > > > upgrade the OS when moving to Pacific? (Sorry if I missed that.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
> > > > > > > > > > >
> > > > > > > > > > > > Le 02/10/2023 à 18:22, Patrick Bégou a écrit :
> > > > > > > > > > > > > Hi all,
> > > > > > > > > > > > >
> > > > > > > > > > > > > still stuck with this problem.
> > > > > > > > > > > > >
> > > > > > > > > > > > > I've deployed octopus and all my HDD have been setup as 
> > > > > > > > > > > > > osd. Fine.
> > > > > > > > > > > > > I've upgraded to pacific and 2 osd have failed. They have 
> > > > > > > > > > > > > been automatically removed and upgrade finishes. Cluster 
> > > > > > > > > > > > > Health is finaly OK, no data loss.
> > > > > > > > > > > > >
> > > > > > > > > > > > > But now I cannot re-add these osd with pacific (I had 
> > > > > > > > > > > > > previous troubles on these old HDDs, lost one osd in 
> > > > > > > > > > > > > octopus and was able to reset and re-add it).
> > > > > > > > > > > > >
> > > > > > > > > > > > > I've tried manually to add the first osd on the node where 
> > > > > > > > > > > > > it is located, following 
> > > > > > > > > > > > > https://docs.ceph.com/en/pacific/rados/operations/bluestore-migration/ 
> > > > > > > > > > > > > (not sure it's the best idea...) but it fails too. This 
> > > > > > > > > > > > > node was the one used for deploying the cluster.
> > > > > > > > > > > > >
> > > > > > > > > > > > > [ceph: root@mostha1 /]# *ceph-volume lvm zap /dev/sdc*
> > > > > > > > > > > > > --> Zapping: /dev/sdc
> > > > > > > > > > > > > --> --destroy was not specified, but zapping a whole 
> > > > > > > > > > > > > device will remove the partition table
> > > > > > > > > > > > > Running command: /usr/bin/dd if=/dev/zero of=/dev/sdc 
> > > > > > > > > > > > > bs=1M count=10 conv=fsync
> > > > > > > > > > > > >  stderr: 10+0 records in
> > > > > > > > > > > > > 10+0 records out
> > > > > > > > > > > > > 10485760 bytes (10 MB, 10 MiB) copied, 0.663425 s, 15.8 MB/s
> > > > > > > > > > > > > --> Zapping successful for: <Raw Device: /dev/sdc>
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > [ceph: root@mostha1 /]# *ceph-volume lvm create 
> > > > > > > > > > > > > --bluestore --data /dev/sdc*
> > > > > > > > > > > > > Running command: /usr/bin/ceph-authtool --gen-print-key
> > > > > > > > > > > > > Running command: /usr/bin/ceph --cluster ceph --name 
> > > > > > > > > > > > > client.bootstrap-osd --keyring 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring -i - osd new 
> > > > > > > > > > > > > 9f1eb8ee-41e6-4350-ad73-1be21234ec7c
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.855+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > auth: unable to find a keyring on 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring: (2) No such file 
> > > > > > > > > > > > > or directory
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.855+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > AuthRegistry(0x7fb4e405c4d8) no keyring found at 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring, disabling cephx
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.856+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > auth: unable to find a keyring on 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring: (2) No such file 
> > > > > > > > > > > > > or directory
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.856+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > AuthRegistry(0x7fb4e40601d0) no keyring found at 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring, disabling cephx
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.857+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > auth: unable to find a keyring on 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring: (2) No such file 
> > > > > > > > > > > > > or directory
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.857+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > AuthRegistry(0x7fb4eb8bee90) no keyring found at 
> > > > > > > > > > > > > /var/lib/ceph/bootstrap-osd/ceph.keyring, disabling cephx
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.858+0000 7fb4e965c700 -1 
> > > > > > > > > > > > > monclient(hunting): handle_auth_bad_method server 
> > > > > > > > > > > > > allowed_methods [2] but i only support [1]
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.858+0000 7fb4e9e5d700 -1 
> > > > > > > > > > > > > monclient(hunting): handle_auth_bad_method server 
> > > > > > > > > > > > > allowed_methods [2] but i only support [1]
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.858+0000 7fb4e8e5b700 -1 
> > > > > > > > > > > > > monclient(hunting): handle_auth_bad_method server 
> > > > > > > > > > > > > allowed_methods [2] but i only support [1]
> > > > > > > > > > > > >  stderr: 2023-10-02T16:09:29.858+0000 7fb4eb8c0700 -1 
> > > > > > > > > > > > > monclient: authenticate NOTE: no keyring found; disabled 
> > > > > > > > > > > > > cephx authentication
> > > > > > > > > > > > >  stderr: [errno 13] RADOS permission denied (error 
> > > > > > > > > > > > > connecting to the cluster)
> > > > > > > > > > > > > -->  RuntimeError: Unable to create a new OSD id
> > > > > > > > > > > > >
> > > > > > > > > > > > > Any idea of what is wrong ?
> > > > > > > > > > > > >
> > > > > > > > > > > > > Thanks
> > > > > > > > > > > > >
> > > > > > > > > > > > > Patrick
> > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I'm still trying to understand what can be wrong or how to 
> > > > > > > > > > > > debug this situation where Ceph cannot see the devices.
> > > > > > > > > > > >
> > > > > > > > > > > > The device :dev/sdc exists:
> > > > > > > > > > > >
> > > > > > > > > > > >    [root@mostha1 ~]# cephadm shell lsmcli ldl
> > > > > > > > > > > >    Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > > > > > > >    Using recent ceph image
> > > > > > > > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e 
> > > > > > > > > > > >    Path     | SCSI VPD 0x83    | Link Type | Serial Number 
> > > > > > > > > > > > | Health
> > > > > > > > > > > >    Status ceph osd purge 2 --force --yes-i-really-mean-it
> > > > > > > > > > > > ------------------------------------------------------------------------- 
> > > > > > > > > > > >    /dev/sda | 50024e92039e4f1c | PATA/SATA | S2B5J90ZA10142 
> > > > > > > > > > > > | Good
> > > > > > > > > > > >    /dev/sdb | 50014ee0ad5953c9 | PATA/SATA | 
> > > > > > > > > > > > WD-WMAYP0982329 | Good
> > > > > > > > > > > >    /dev/sdc | 50024e920387fa2c | PATA/SATA | S2B5J90ZA02494 
> > > > > > > > > > > > | Good
> > > > > > > > > > > >
> > > > > > > > > > > > But I cannot do anything with it:
> > > > > > > > > > > >
> > > > > > > > > > > >    [root@mostha1 ~]# cephadm shell ceph orch device zap
> > > > > > > > > > > >    mostha1.legi.grenoble-inp.fr /dev/sdc --force
> > > > > > > > > > > >    Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
> > > > > > > > > > > >    Using recent ceph image
> > > > > > > > > > > > quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e 
> > > > > > > > > > > >    Error EINVAL: Device path '/dev/sdc' not found on host
> > > > > > > > > > > >    'mostha1.legi.grenoble-inp.fr'
> > > > > > > > > > > >
> > > > > > > > > > > > Since I moved from octopus to Pacific.
> > > > > > > > > > > >
> > > > > > > > > > > > Patrick
> > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > _______________________________________________
> > > > > > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > > > > > >
> > > > > > > > > > _______________________________________________
> > > > > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > _______________________________________________
> > > > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > > >
> > > > > > _______________________________________________
> > > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > > >
> > > > _______________________________________________
> > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > >
> > >
> > > _______________________________________________
> > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> >
> > _______________________________________________
> > ceph-users mailing list -- ceph-users@xxxxxxx
> > To unsubscribe send an email to ceph-users-leave@xxxxxxx
>
>
>
> _______________________________________________
> ceph-users mailing list -- ceph-users@xxxxxxx
> To unsubscribe send an email to ceph-users-leave@xxxxxxx

_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx