Hi Eugen,
[root@mostha1 ~]# rpm -q cephadm
cephadm-16.2.14-0.el8.noarch
Log associated to the
2023-10-11 16:16:02,167 7f820515fb80 DEBUG
--------------------------------------------------------------------------------
cephadm ['gather-facts']
2023-10-11 16:16:02,208 7f820515fb80 DEBUG /bin/podman: 4.4.1
2023-10-11 16:16:02,313 7f820515fb80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:02,317 7f820515fb80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:02,322 7f820515fb80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:02,326 7f820515fb80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:02,329 7f820515fb80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:02,333 7f820515fb80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:04,474 7ff2a5c08b80 DEBUG
--------------------------------------------------------------------------------
cephadm ['ceph-volume', 'inventory']
2023-10-11 16:16:04,516 7ff2a5c08b80 DEBUG /usr/bin/podman: 4.4.1
2023-10-11 16:16:04,520 7ff2a5c08b80 DEBUG Using default config:
/etc/ceph/ceph.conf
2023-10-11 16:16:04,573 7ff2a5c08b80 DEBUG /usr/bin/podman:
0d28d71358d7,445.8MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
2084faaf4d54,13.27MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
61073c53805d,512.7MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
6b9f0b72d668,361.1MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
7493a28808ad,163.7MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
a89672a3accf,59.22MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
b45271cc9726,54.24MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
e00ec13ab138,707.3MB / 50.32GB
2023-10-11 16:16:04,574 7ff2a5c08b80 DEBUG /usr/bin/podman:
fcb1e1a6b08d,35.55MB / 50.32GB
2023-10-11 16:16:04,630 7ff2a5c08b80 DEBUG /usr/bin/podman:
0d28d71358d7,1.28%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
2084faaf4d54,0.00%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
61073c53805d,1.19%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
6b9f0b72d668,1.03%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
7493a28808ad,0.78%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
a89672a3accf,0.11%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
b45271cc9726,1.35%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
e00ec13ab138,0.43%
2023-10-11 16:16:04,631 7ff2a5c08b80 DEBUG /usr/bin/podman:
fcb1e1a6b08d,0.02%
2023-10-11 16:16:04,634 7ff2a5c08b80 INFO Inferring fsid
250f9864-0142-11ee-8e5f-00266cf8869c
2023-10-11 16:16:04,691 7ff2a5c08b80 DEBUG /usr/bin/podman:
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
2023-10-11 16:16:04,692 7ff2a5c08b80 DEBUG /usr/bin/podman:
quay.io/ceph/ceph@sha256:c08064dde4bba4e72a1f55d90ca32df9ef5aafab82efe2e0a0722444a5aaacca
2023-10-11 16:16:04,692 7ff2a5c08b80 DEBUG /usr/bin/podman:
docker.io/ceph/ceph@sha256:056637972a107df4096f10951e4216b21fcd8ae0b9fb4552e628d35df3f61139
2023-10-11 16:16:04,694 7ff2a5c08b80 INFO Using recent ceph image
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
2023-10-11 16:16:05,094 7ff2a5c08b80 DEBUG stat: 167 167
2023-10-11 16:16:05,903 7ff2a5c08b80 DEBUG Acquiring lock
140679815723776 on /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
2023-10-11 16:16:05,903 7ff2a5c08b80 DEBUG Lock 140679815723776 acquired
on /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
2023-10-11 16:16:05,929 7ff2a5c08b80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:05,933 7ff2a5c08b80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:16:06,700 7ff2a5c08b80 DEBUG /usr/bin/podman:
2023-10-11 16:16:06,701 7ff2a5c08b80 DEBUG /usr/bin/podman: Device
Path Size Device nodes rotates available Model name
I have only one version of cephadm in /var/lib/ceph/{fsid} :
[root@mostha1 ~]# ls -lrt
/var/lib/ceph/250f9864-0142-11ee-8e5f-00266cf8869c/cephadm*
-rw-r--r-- 1 root root 350889 28 sept. 16:39
/var/lib/ceph/250f9864-0142-11ee-8e5f-00266cf8869c/cephadm.f6868821c084cd9740b59c7c5eb59f0dd47f6e3b1e6fecb542cb44134ace8d78
Running " python3
/var/lib/ceph/250f9864-0142-11ee-8e5f-00266cf8869c/cephadm.f6868821c084cd9740b59c7c5eb59f0dd47f6e3b1e6fecb542cb44134ace8d78
ceph-volume inventory" give the same output and the same log (execpt the
valu of the lock):
2023-10-11 16:21:35,965 7f467cf31b80 DEBUG
--------------------------------------------------------------------------------
cephadm ['ceph-volume', 'inventory']
2023-10-11 16:21:36,009 7f467cf31b80 DEBUG /usr/bin/podman: 4.4.1
2023-10-11 16:21:36,012 7f467cf31b80 DEBUG Using default config:
/etc/ceph/ceph.conf
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
0d28d71358d7,452.1MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
2084faaf4d54,13.27MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
61073c53805d,513.6MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
6b9f0b72d668,322.4MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
7493a28808ad,164MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
a89672a3accf,58.5MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
b45271cc9726,54.69MB / 50.32GB
2023-10-11 16:21:36,067 7f467cf31b80 DEBUG /usr/bin/podman:
e00ec13ab138,707.1MB / 50.32GB
2023-10-11 16:21:36,068 7f467cf31b80 DEBUG /usr/bin/podman:
fcb1e1a6b08d,36.28MB / 50.32GB
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
0d28d71358d7,1.27%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
2084faaf4d54,0.00%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
61073c53805d,1.16%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
6b9f0b72d668,1.02%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
7493a28808ad,0.78%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
a89672a3accf,0.11%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
b45271cc9726,1.35%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
e00ec13ab138,0.41%
2023-10-11 16:21:36,125 7f467cf31b80 DEBUG /usr/bin/podman:
fcb1e1a6b08d,0.02%
2023-10-11 16:21:36,128 7f467cf31b80 INFO Inferring fsid
250f9864-0142-11ee-8e5f-00266cf8869c
2023-10-11 16:21:36,186 7f467cf31b80 DEBUG /usr/bin/podman:
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
2023-10-11 16:21:36,187 7f467cf31b80 DEBUG /usr/bin/podman:
quay.io/ceph/ceph@sha256:c08064dde4bba4e72a1f55d90ca32df9ef5aafab82efe2e0a0722444a5aaacca
2023-10-11 16:21:36,187 7f467cf31b80 DEBUG /usr/bin/podman:
docker.io/ceph/ceph@sha256:056637972a107df4096f10951e4216b21fcd8ae0b9fb4552e628d35df3f61139
2023-10-11 16:21:36,189 7f467cf31b80 INFO Using recent ceph image
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
2023-10-11 16:21:36,549 7f467cf31b80 DEBUG stat: 167 167
2023-10-11 16:21:36,942 7f467cf31b80 DEBUG Acquiring lock
139940396923424 on /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
2023-10-11 16:21:36,942 7f467cf31b80 DEBUG Lock 139940396923424 acquired
on /run/cephadm/250f9864-0142-11ee-8e5f-00266cf8869c.lock
2023-10-11 16:21:36,969 7f467cf31b80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:21:36,972 7f467cf31b80 DEBUG sestatus: SELinux
status: disabled
2023-10-11 16:21:37,749 7f467cf31b80 DEBUG /usr/bin/podman:
2023-10-11 16:21:37,750 7f467cf31b80 DEBUG /usr/bin/podman: Device
Path Size Device nodes rotates available Model name
Patrick
Le 11/10/2023 à 15:59, Eugen Block a écrit :
Can you check which cephadm version is installed on the host? And then
please add (only the relevant) output from the cephadm.log when you
run the inventory (without the --image <octopus>). Sometimes the
version mismatch on the host and the one the orchestrator uses can
cause some disruptions. You could try the same with the latest cephadm
you have in /var/lib/ceph/${fsid}/ (ls -lrt
/var/lib/ceph/${fsid}/cephadm.*). I mentioned that in this thread [1].
So you could try the following:
$ chmod +x /var/lib/ceph/{fsid}/cephadm.{latest}
$ python3 /var/lib/ceph/{fsid}/cephadm.{latest} ceph-volume inventory
Does the output differ? Paste the relevant cephadm.log from that
attempt as well.
[1]
https://lists.ceph.io/hyperkitty/list/ceph-users@xxxxxxx/thread/LASBJCSPFGDYAWPVE2YLV2ZLF3HC5SLS/
Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
Hi Eugen,
first many thanks for the time spent on this problem.
"ceph osd purge 2 --force --yes-i-really-mean-it" works and clean all
the bas status.
*[root@mostha1 ~]# cephadm shell
*Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
Using recent ceph image
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
*
*
*[ceph: root@mostha1 /]# ceph osd purge 2 --force
--yes-i-really-mean-it *
purged osd.2
*
*
*[ceph: root@mostha1 /]# ceph osd tree*
ID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF
-1 1.72823 root default
-5 0.45477 host dean
0 hdd 0.22739 osd.0 up 1.00000 1.00000
4 hdd 0.22739 osd.4 up 1.00000 1.00000
-9 0.22739 host ekman
6 hdd 0.22739 osd.6 up 1.00000 1.00000
-7 0.45479 host mostha1
5 hdd 0.45479 osd.5 up 1.00000 1.00000
-3 0.59128 host mostha2
1 hdd 0.22739 osd.1 up 1.00000 1.00000
3 hdd 0.36389 osd.3 up 1.00000 1.00000
*
*
*[ceph: root@mostha1 /]# lsblk*
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 232.9G 0 disk
|-sda1 8:1 1 3.9G 0 part /rootfs/boot
|-sda2 8:2 1 3.9G 0 part [SWAP]
`-sda3 8:3 1 225G 0 part
|-al8vg-rootvol 253:0 0 48.8G 0 lvm /rootfs
|-al8vg-homevol 253:2 0 9.8G 0 lvm /rootfs/home
|-al8vg-tmpvol 253:3 0 9.8G 0 lvm /rootfs/tmp
`-al8vg-varvol 253:4 0 19.8G 0 lvm /rootfs/var
sdb 8:16 1 465.8G 0 disk
`-ceph--08827fdc--136e--4070--97e9--e5e8b3970766-osd--block--7dec1808--d6f4--4f90--ac74--75a4346e1df5
253:1 0 465.8G 0 lvm
sdc 8:32 1 232.9G 0 disk
"cephadm ceph-volume inventory" returns nothing:
*[root@mostha1 ~]# cephadm ceph-volume inventory **
*Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
Using recent ceph image
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
Device Path Size Device nodes rotates
available Model name
[root@mostha1 ~]#
But running the same command within cephadm 15.2.17 works:
*[root@mostha1 ~]# cephadm --image 93146564743f ceph-volume inventory*
Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
Device Path Size rotates available Model name
/dev/sdc 232.83 GB True True SAMSUNG HE253GJ
/dev/sda 232.83 GB True False SAMSUNG HE253GJ
/dev/sdb 465.76 GB True False WDC
WD5003ABYX-1
[root@mostha1 ~]#
*[root@mostha1 ~]# podman images -a**
*REPOSITORY TAG IMAGE ID
CREATED SIZE
quay.io/ceph/ceph v16.2.14 f13d80acdbb5 2 weeks
ago 1.21 GB
quay.io/ceph/ceph v15.2.17 93146564743f 14 months
ago 1.24 GB
....
Patrick
Le 11/10/2023 à 15:14, Eugen Block a écrit :
Your response is a bit confusing since it seems to be mixed up with
the previous answer. So you still need to remove the OSD properly,
so purge it from the crush tree:
ceph osd purge 2 --force --yes-i-really-mean-it (only in a test
cluster!)
If everything is clean (OSD has been removed, disk has been zapped,
lsblk shows no LVs for that disk) you can check the inventory:
cephadm ceph-volume inventory
Please also add the output of 'ceph orch ls osd --export'.
Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
Hi Eugen,
- the OS is Alma Linux 8 with latests updates.
- this morning I've worked with ceph-volume but it ends with a
strange final state. I was connected on host mostha1 where /dev/sdc
was not reconized. These are the steps followed based on the
ceph-volume documentation I've read:
[root@mostha1 ~]# cephadm shell
[ceph: root@mostha1 /]# ceph auth get client.bootstrap-osd >
/var/lib/ceph/bootstrap-osd/ceph.keyring
[ceph: root@mostha1 /]# ceph-volume lvm prepare --bluestore --data
/dev/sdc
Now lsblk command shows sdc as an osd:
....
sdb 8:16 1 465.8G 0 disk
`-ceph--08827fdc--136e--4070--97e9--e5e8b3970766-osd--block--7dec1808--d6f4--4f90--ac74--75a4346e1df5
253:1 0 465.8G 0 lvm
sdc 8:32 1 232.9G 0 disk
`-ceph--b27d7a07--278d--4ee2--b84e--53256ef8de4c-osd--block--45c8e92c--caf9--4fe7--9a42--7b45a0794632
253:5 0 232.8G 0 lvm
Then I've tried to activate this osd but it fails as in podman I
have not access to systemctl:
[ceph: root@mostha1 /]# ceph-volume lvm activate 2
45c8e92c-caf9-4fe7-9a42-7b45a0794632
.....
Running command: /usr/bin/systemctl start ceph-osd@2
stderr: Failed to connect to bus: No such file or directory
--> RuntimeError: command returned non-zero exit status: 1
[ceph: root@mostha1 /]# ceph osd tree
And now I have now I have a strange status for this osd.2:
[ceph: root@mostha1 /]# ceph osd tree
ID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF
-1 1.72823 root default
-5 0.45477 host dean
0 hdd 0.22739 osd.0 up 1.00000 1.00000
4 hdd 0.22739 osd.4 up 1.00000 1.00000
-9 0.22739 host ekman
6 hdd 0.22739 osd.6 up 1.00000 1.00000
-7 0.45479 host mostha1
5 hdd 0.45479 osd.5 up 1.00000 1.00000
-3 0.59128 host mostha2
1 hdd 0.22739 osd.1 up 1.00000 1.00000
3 hdd 0.36389 osd.3 up 1.00000 1.00000
2 0 osd.2 down 0 1.00000
I've tried to destroy the osd as you suggest but even if the
command returns no error I still have this osd even if "lsblk" do
not show any more /dev/sdc as a ceph osd device.
*[ceph: root@mostha1 /]# ceph-volume lvm zap --destroy /dev/sdc**
*--> Zapping: /dev/sdc
--> Zapping lvm member /dev/sdc. lv_path is
/dev/ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c/osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632
--> Unmounting /var/lib/ceph/osd/ceph-2
Running command: /usr/bin/umount -v /var/lib/ceph/osd/ceph-2
stderr: umount: /var/lib/ceph/osd/ceph-2 unmounted
Running command: /usr/bin/dd if=/dev/zero
of=/dev/ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c/osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632
bs=1M count=10 conv=fsync
stderr: 10+0 records in
10+0 records out
10485760 bytes (10 MB, 10 MiB) copied, 0.575633 s, 18.2 MB/s
--> Only 1 LV left in VG, will proceed to destroy volume group
ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c
Running command: nsenter --mount=/rootfs/proc/1/ns/mnt
--ipc=/rootfs/proc/1/ns/ipc --net=/rootfs/proc/1/ns/net
--uts=/rootfs/proc/1/ns/uts /sbin/vgremove -v -f
ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c
stderr: Removing
ceph--b27d7a07--278d--4ee2--b84e--53256ef8de4c-osd--block--45c8e92c--caf9--4fe7--9a42--7b45a0794632
(253:1)
stderr: Releasing logical volume
"osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632"
stderr: Archiving volume group
"ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c" metadata (seqno 5).
stdout: Logical volume
"osd-block-45c8e92c-caf9-4fe7-9a42-7b45a0794632" successfully removed.
stderr: Removing physical volume "/dev/sdc" from volume group
"ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c"
stdout: Volume group "ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c"
successfully removed
stderr: Creating volume group backup
"/etc/lvm/backup/ceph-b27d7a07-278d-4ee2-b84e-53256ef8de4c" (seqno 6).
Running command: nsenter --mount=/rootfs/proc/1/ns/mnt
--ipc=/rootfs/proc/1/ns/ipc --net=/rootfs/proc/1/ns/net
--uts=/rootfs/proc/1/ns/uts /sbin/pvremove -v -f -f /dev/sdc
stdout: Labels on physical volume "/dev/sdc" successfully wiped.
Running command: /usr/bin/dd if=/dev/zero of=/dev/sdc bs=1M
count=10 conv=fsync
stderr: 10+0 records in
10+0 records out
10485760 bytes (10 MB, 10 MiB) copied, 0.590652 s, 17.8 MB/s
*--> Zapping successful for: <Raw Device: /dev/sdc>*
*
*
*[ceph: root@mostha1 /]# ceph osd tree**
*ID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF
-1 1.72823 root default
-5 0.45477 host dean
0 hdd 0.22739 osd.0 up 1.00000 1.00000
4 hdd 0.22739 osd.4 up 1.00000 1.00000
-9 0.22739 host ekman
6 hdd 0.22739 osd.6 up 1.00000 1.00000
-7 0.45479 host mostha1
5 hdd 0.45479 osd.5 up 1.00000 1.00000
-3 0.59128 host mostha2
1 hdd 0.22739 osd.1 up 1.00000 1.00000
3 hdd 0.36389 osd.3 up 1.00000 1.00000
2 0 osd.2 down 0 1.00000
*
*
*[ceph: root@mostha1 /]# lsblk**
*NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 232.9G 0 disk
|-sda1 8:1 1 3.9G 0 part /rootfs/boot
|-sda2 8:2 1 3.9G 0 part [SWAP]
`-sda3 8:3 1 225G 0 part
|-al8vg-rootvol 253:0 0 48.8G 0 lvm /rootfs
|-al8vg-homevol 253:3 0 9.8G 0 lvm /rootfs/home
|-al8vg-tmpvol 253:4 0 9.8G 0 lvm /rootfs/tmp
`-al8vg-varvol 253:5 0 19.8G 0 lvm /rootfs/var
sdb 8:16 1 465.8G 0 disk
`-ceph--08827fdc--136e--4070--97e9--e5e8b3970766-osd--block--7dec1808--d6f4--4f90--ac74--75a4346e1df5
253:2 0 465.8G 0 lvm
*sdc *
Patrick
Le 11/10/2023 à 11:00, Eugen Block a écrit :
Hi,
just wondering if 'ceph-volume lvm zap --destroy /dev/sdc' would
help here. From your previous output you didn't specify the
--destroy flag.
Which cephadm version is installed on the host? Did you also
upgrade the OS when moving to Pacific? (Sorry if I missed that.
Zitat von Patrick Begou <Patrick.Begou@xxxxxxxxxxxxxxxxxxxxxx>:
Le 02/10/2023 à 18:22, Patrick Bégou a écrit :
Hi all,
still stuck with this problem.
I've deployed octopus and all my HDD have been setup as osd. Fine.
I've upgraded to pacific and 2 osd have failed. They have been
automatically removed and upgrade finishes. Cluster Health is
finaly OK, no data loss.
But now I cannot re-add these osd with pacific (I had previous
troubles on these old HDDs, lost one osd in octopus and was able
to reset and re-add it).
I've tried manually to add the first osd on the node where it is
located, following
https://docs.ceph.com/en/pacific/rados/operations/bluestore-migration/
(not sure it's the best idea...) but it fails too. This node was
the one used for deploying the cluster.
[ceph: root@mostha1 /]# *ceph-volume lvm zap /dev/sdc*
--> Zapping: /dev/sdc
--> --destroy was not specified, but zapping a whole device will
remove the partition table
Running command: /usr/bin/dd if=/dev/zero of=/dev/sdc bs=1M
count=10 conv=fsync
stderr: 10+0 records in
10+0 records out
10485760 bytes (10 MB, 10 MiB) copied, 0.663425 s, 15.8 MB/s
--> Zapping successful for: <Raw Device: /dev/sdc>
[ceph: root@mostha1 /]# *ceph-volume lvm create --bluestore
--data /dev/sdc*
Running command: /usr/bin/ceph-authtool --gen-print-key
Running command: /usr/bin/ceph --cluster ceph --name
client.bootstrap-osd --keyring
/var/lib/ceph/bootstrap-osd/ceph.keyring -i - osd new
9f1eb8ee-41e6-4350-ad73-1be21234ec7c
stderr: 2023-10-02T16:09:29.855+0000 7fb4eb8c0700 -1 auth:
unable to find a keyring on
/var/lib/ceph/bootstrap-osd/ceph.keyring: (2) No such file or
directory
stderr: 2023-10-02T16:09:29.855+0000 7fb4eb8c0700 -1
AuthRegistry(0x7fb4e405c4d8) no keyring found at
/var/lib/ceph/bootstrap-osd/ceph.keyring, disabling cephx
stderr: 2023-10-02T16:09:29.856+0000 7fb4eb8c0700 -1 auth:
unable to find a keyring on
/var/lib/ceph/bootstrap-osd/ceph.keyring: (2) No such file or
directory
stderr: 2023-10-02T16:09:29.856+0000 7fb4eb8c0700 -1
AuthRegistry(0x7fb4e40601d0) no keyring found at
/var/lib/ceph/bootstrap-osd/ceph.keyring, disabling cephx
stderr: 2023-10-02T16:09:29.857+0000 7fb4eb8c0700 -1 auth:
unable to find a keyring on
/var/lib/ceph/bootstrap-osd/ceph.keyring: (2) No such file or
directory
stderr: 2023-10-02T16:09:29.857+0000 7fb4eb8c0700 -1
AuthRegistry(0x7fb4eb8bee90) no keyring found at
/var/lib/ceph/bootstrap-osd/ceph.keyring, disabling cephx
stderr: 2023-10-02T16:09:29.858+0000 7fb4e965c700 -1
monclient(hunting): handle_auth_bad_method server
allowed_methods [2] but i only support [1]
stderr: 2023-10-02T16:09:29.858+0000 7fb4e9e5d700 -1
monclient(hunting): handle_auth_bad_method server
allowed_methods [2] but i only support [1]
stderr: 2023-10-02T16:09:29.858+0000 7fb4e8e5b700 -1
monclient(hunting): handle_auth_bad_method server
allowed_methods [2] but i only support [1]
stderr: 2023-10-02T16:09:29.858+0000 7fb4eb8c0700 -1 monclient:
authenticate NOTE: no keyring found; disabled cephx authentication
stderr: [errno 13] RADOS permission denied (error connecting to
the cluster)
--> RuntimeError: Unable to create a new OSD id
Any idea of what is wrong ?
Thanks
Patrick
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
I'm still trying to understand what can be wrong or how to debug
this situation where Ceph cannot see the devices.
The device :dev/sdc exists:
[root@mostha1 ~]# cephadm shell lsmcli ldl
Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
Using recent ceph image
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
Path | SCSI VPD 0x83 | Link Type | Serial Number | Health
Status ceph osd purge 2 --force --yes-i-really-mean-it
-------------------------------------------------------------------------
/dev/sda | 50024e92039e4f1c | PATA/SATA | S2B5J90ZA10142 | Good
/dev/sdb | 50014ee0ad5953c9 | PATA/SATA | WD-WMAYP0982329 | Good
/dev/sdc | 50024e920387fa2c | PATA/SATA | S2B5J90ZA02494 | Good
But I cannot do anything with it:
[root@mostha1 ~]# cephadm shell ceph orch device zap
mostha1.legi.grenoble-inp.fr /dev/sdc --force
Inferring fsid 250f9864-0142-11ee-8e5f-00266cf8869c
Using recent ceph image
quay.io/ceph/ceph@sha256:f30bf50755d7087f47c6223e6a921caf5b12e86401b3d49220230c84a8302a1e
Error EINVAL: Device path '/dev/sdc' not found on host
'mostha1.legi.grenoble-inp.fr'
Since I moved from octopus to Pacific.
Patrick
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
