# ceph orch osd rm status
No OSD remove/replace operations reported
# ceph orch osd rm 232 --replace
Unable to find OSDs: ['232']
It is not finding 232 anymore. It is still shown as down and out in the
Ceph-Dashboard.
pgs: 3236 active+clean
This is the new disk shown as locked (because unzapped at the moment).
# ceph orch device ls
ceph-a1-06 /dev/sdm hdd TOSHIBA_X_X 16.0T 9m ago
locked
Best
Ken
On 29.01.23 18:19, David Orman wrote:
What does "ceph orch osd rm status" show before you try the zap? Is
your cluster still backfilling to the other OSDs for the PGs that were
on the failed disk?
David
On Fri, Jan 27, 2023, at 03:25, mailing-lists wrote:
Dear Ceph-Users,
i am struggling to replace a disk. My ceph-cluster is not replacing the
old OSD even though I did:
ceph orch osd rm 232 --replace
The OSD 232 is still shown in the osd list, but the new hdd will be
placed as a new OSD. This wouldnt mind me much, if the OSD was also
placed on the bluestoreDB / NVME, but it doesn't.
My steps:
"ceph orch osd rm 232 --replace"
remove the failed hdd.
add the new one.
Convert the disk within the servers bios, so that the node can have
direct access on it.
It shows up as /dev/sdt,
enter maintenance mode
reboot server
drive is now /dev/sdm (which the old drive had)
"ceph orch device zap node-x /dev/sdm"
A new OSD is placed on the cluster.
Can you give me a hint, where did I take a wrong turn? Why is the disk
not being used as OSD 232?
Best
Ken
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
