Re: ceph 16.2.10 cluster down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jens,

On 26.01.23 16:17, Jens Galsgaard wrote:

After removing the dead monitors with the monmaptool the mon container has vanished from podman.
So this somehow made things worse.

You have not mentioned that you are running Ceph in containers.

The procedure to repair the MON map may look a little bit different then. The documentation only shows the non-containerized procedure.

Do you still have the systemd unit for the last working MON?

Run "systemctl --all | grep mon" to look for it. If it is stop try to start it. Does the MON run?

Is it possible to create and add  new monitors? Re-bootstrap the cluster in lack of better terms?

It should be possible to restore the MON db using an exisiting OSD:

https://docs.ceph.com/en/pacific/rados/troubleshooting/troubleshooting-mon/#recovery-using-osds

This procedure would also have to be adapted for a containerized setup.

Regards
--
Robert Sander
Heinlein Consulting GmbH
Schwedter Str. 8/9b, 10119 Berlin

https://www.heinlein-support.de

Tel: 030 / 405051-43
Fax: 030 / 405051-19

Amtsgericht Berlin-Charlottenburg - HRB 220009 B
Geschäftsführer: Peer Heinlein - Sitz: Berlin
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux