From: osd_scrub_load_threshold The normalized maximum load. Ceph will not scrub when the system load (as defined by getloadavg() / number of online CPUs) is higher than this number. Default is 0.5. Does anyone know how I can run getloadavg() / number of online CPUs so I can see what our load is? Is that a ceph command, or an OS command? Thank you, Ray -----Original Message----- From: Ray Cunningham Sent: Thursday, March 10, 2022 7:59 AM To: norman.kern <norman.kern@xxxxxxx> Cc: ceph-users@xxxxxxx Subject: RE: Scrubbing We have 16 Storage Servers each with 16TB HDDs and 2TB SSDs for DB/WAL, so we are using bluestore. The system is running Nautilus 14.2.19 at the moment, with an upgrade scheduled this month. I can't give you a complete ceph config dump as this is an offline customer system, but I can get answers for specific questions. Off the top of my head, we have set: osd_max_scrubs 20 osd_scrub_auto_repair true osd _scrub_load_threashold 0.6 We do not limit srub hours. Thank you, Ray -----Original Message----- From: norman.kern <norman.kern@xxxxxxx> Sent: Wednesday, March 9, 2022 7:28 PM To: Ray Cunningham <ray.cunningham@xxxxxxxxxxxxxx> Cc: ceph-users@xxxxxxx Subject: Re: Scrubbing Ray, Can you provide more information about your cluster(hardware and software configs)? On 3/10/22 7:40 AM, Ray Cunningham wrote: > make any difference. Do _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |