going to deploy a test cluster and successfully deployed my first
monitor (hurray!).
Now trying to add the first osd host following instructions at:
https://docs.ceph.com/en/latest/install/manual-deployment/#bluestore
ceph-volume lvm zap --destroy /dev/sdb
ceph-volume lvm create --data /dev/sdb --dmcrypt
systemctl enable ceph-osd@0
# ceph-volume lvm create --data /dev/sdb --dmcrypt --cluster euch01
Running command: /usr/bin/ceph-authtool --gen-print-key
Running command: /usr/bin/ceph-authtool --gen-print-key
--> RuntimeError: No valid ceph configuration file was loaded.
[root@osd1 ~]# ceph-authtool --gen-print-key
AQCADBxhqFIDNhAAQlwoW1l983923Ms/EJuSiA==
[root@osd1 ~]# ceph-authtool --gen-print-key --cluster euch01
AQCcDBxh1zzbGBAAW8tVp0aX668zpGUobhQWBg==
This to say that the zap --destroy worked.
The lvm create raised an error; running the ceph-authtool alone worked,
so I have a valid configuration file on my osd node; ceph-authtool
worked both specifying and not specifying the cluster name.
F.
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
