Hello Stefan! Thanks for the input. Yes that was a typo. I have created the file /etc/ceph/ceph.client.dev.wsc.key and entered just the key without anything else. fstab line now looks like this: none /mnt/ceph fuse.ceph ceph.id=dev.wsc,ceph.client_mountpoint=/testing/dev.wsc/userdata,_netdev,defaults 0 0 I still get the same "Permission denied" message. But this fuse command also works: ceph-fuse --id dev.wsc -r /testing/dev.wsc/userdata /mnt/ceph Does anyone have any other ideas? Thanks, Simon ________________________________ Von: Stefan Kooman <stefan@xxxxxx> Gesendet: Donnerstag, 1. Juli 2021 16:42:56 An: Simon Sutter; ceph-users@xxxxxxx Betreff: Re: configure fuse in fstab On 7/1/21 4:14 PM, Simon Sutter wrote: > Hello Everyone! > > I'm trying to mount the ceph, with the fuse client under debian 9 (ceph-fuse 10.2.11-2). > > Ceph is on the latest Octopus release. > The direct command is working, but writing it in fstab does not. > > > Command I use: > ceph-fuse --id dev.wsc -k /etc/ceph/ceph.clinet.dev.wsc.keyring -r /testing/dev.wsc/userdata /mnt/ceph > > > /etc/ceph.conf: > > [global] > fsid = [fsid] > mon_host = 10.99.15.1 10.99.15.2 10.99.15.3 10.99.15.4 10.99.15.5 > > > /etc/ceph/ceph.clinet.dev.wsc.keyring: ^^ I guess that is a typo > > [client.dev.wsc] > key = [key] Can you try to put the file "ceph.client.dev.wsc.key" in /etc/ceph and only put the key in it (nothing else) ... and try again Gr. Stefan P.s. There should be no need for ceph.conf=/etc/ceph/ceph.conf as its the default location. _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx