Thank you for the command. I successfully stopped and started the mgr daemon on that node but still the version number on the ceph dashboard is stuck on the old version 15.2.10. On that node I also have the mon daemon running, should I also restart mon?
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, April 29, 2021 8:20 PM, Eugen Block <eblock@xxxxxx> wrote:
> Try this:
>
> ceph orch daemon stop mgr.<MGR>
>
> and then after another daemon took over its role start it again:
>
> ceph orch daemon start mgr.<MGR>
>
> Zitat von mabimabi@xxxxxxxxxxxxx:
>
> > I also thought about restarting the MGR service but I am new to ceph
> > and could not find the "cephadm orch" command in order to do that...
> > What would be the command to restart the mgr service on a specific
> > node?
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Thursday, April 29, 2021 7:23 PM, Eugen Block eblock@xxxxxx wrote:
> >
> > > I would restart the active MGR, that should resolve it.
> > > Zitat von mabi mabi@xxxxxxxxxxxxx:
> > >
> > > > Hello,
> > > > I upgraded my Octopus test cluster which has 5 hosts because one of
> > > > the node (a mon/mgr node) was still on version 15.2.10 but all the
> > > > others on 15.2.11.
> > > > For the upgrade I used the following command:
> > > > ceph orch upgrade start --ceph-version 15.2.11
> > > > The upgrade worked correctly and I did not see any errors in the
> > > > logs but the host version in the ceph dashboard (under the
> > > > navigation Cluster -> Hosts) still snows 15.2.10 for that specific
> > > > node.
> > > > The output of "ceph versions", shows that every component is on
> > > > 15.2.11 as you can see below:
> > > > {
> > > > "mon": {
> > > > "ceph version 15.2.11
> > > > (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 3
> > > > },
> > > > "mgr": {
> > > > "ceph version 15.2.11
> > > > (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 2
> > > > },
> > > > "osd": {
> > > > "ceph version 15.2.11
> > > > (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 2
> > > > },
> > > > "mds": {},
> > > > "overall": {
> > > > "ceph version 15.2.11
> > > > (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 7
> > > > }
> > > > }
> > > > So why is it still stuck on 15.2.10 in the dashboard?
> > > > Best regards,
> > > > Mabi
> > > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
> > >
> > > ceph-users mailing list -- ceph-users@xxxxxxx
> > > To unsubscribe send an email to ceph-users-leave@xxxxxxx
>
> ceph-users mailing list -- ceph-users@xxxxxxx
> To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
