Try this:
ceph orch daemon stop mgr.<MGR>
and then after another daemon took over its role start it again:
ceph orch daemon start mgr.<MGR>
Zitat von mabi <mabi@xxxxxxxxxxxxx>:
I also thought about restarting the MGR service but I am new to ceph
and could not find the "cephadm orch" command in order to do that...
What would be the command to restart the mgr service on a specific
node?
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, April 29, 2021 7:23 PM, Eugen Block <eblock@xxxxxx> wrote:
I would restart the active MGR, that should resolve it.
Zitat von mabi mabi@xxxxxxxxxxxxx:
> Hello,
> I upgraded my Octopus test cluster which has 5 hosts because one of
> the node (a mon/mgr node) was still on version 15.2.10 but all the
> others on 15.2.11.
> For the upgrade I used the following command:
> ceph orch upgrade start --ceph-version 15.2.11
> The upgrade worked correctly and I did not see any errors in the
> logs but the host version in the ceph dashboard (under the
> navigation Cluster -> Hosts) still snows 15.2.10 for that specific
> node.
> The output of "ceph versions", shows that every component is on
> 15.2.11 as you can see below:
> {
> "mon": {
> "ceph version 15.2.11
> (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 3
> },
> "mgr": {
> "ceph version 15.2.11
> (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 2
> },
> "osd": {
> "ceph version 15.2.11
> (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 2
> },
> "mds": {},
> "overall": {
> "ceph version 15.2.11
> (e3523634d9c2227df9af89a4eac33d16738c49cb) octopus (stable)": 7
> }
> }
> So why is it still stuck on 15.2.10 in the dashboard?
> Best regards,
> Mabi
>
> ceph-users mailing list -- ceph-users@xxxxxxx
> To unsubscribe send an email to ceph-users-leave@xxxxxxx
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
