I increased the debug level to 20. There isn't anything additional being written: 2021-02-23 16:26:38.736642 7£2c45£3700 -1 Initialization timeout, failed to initialize 2021-02-23 16:26:38.931400 7f4d7bf4a000 0 deferred set uid:gid to 167:167 (ceph:ceph) 2021-02-23 16:26:38.931707 7f4d7bf4a000 0 ceph version 12.2.8-128.1. TEST. bz1742993.el7cp (87ba41fa7b3bcb79d916fb0ca41a9dd90eb877f8) luminous (stable), process radosgw, pid 7169 2021-02-23 16:31:38.931973 7f4d6b8e5700 -1 Initialization timeout, failed to initialize 2021-02-23 16:31:39.191898 7fa2fae31000 deferred set uid:gid to 167:167 (ceph:ceph) 2021-02-23 16:31:39.192119 7fa2fae31000 0 ceph version 12.2.8-128.1. TEST.bz1742993.el7cp (87ba41fa7b3bcb79d916fb0ca41a9dd90eb877f8) luminous (stable), process radosgw, pid 7204 Thank you, Mathew Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Tuesday, February 23, 2021 10:57 AM, Janne Johansson <icepic.dz@xxxxxxxxx> wrote: > Den tis 23 feb. 2021 kl 16:53 skrev Mathew Snyder > mathew.snyder@xxxxxxxxxxxxxx: > > > We have a Red Hat installation of Luminuous (full packages version: 12.2.8-128.1). We're experiencing an issue where the ceph-radosgw service will timeout during initialization and cycle through attempts every five minutes until it seems to just give up. Every other ceph service starts successfully. > > I tried looking at the health of the cluster, but anytime I run a command, whether ceph or radosgw-admin just to see a list of users, it seems to time out as well. > > I've used strace when attempting to start radosgw directly and was presented with a missing keyring error. I would be inclined to think that might be the problem, but wouldn't that also impact all of the other services? > > No, a missing rgw key would stop only it, and the radosgw-admin > command (if run on a box without a global admin key) > > > I haven't been able to find anything in the logs that would lead me down any paths. Everything I've looked at (journalctl, /var/log/messages, /var/log/ceph/ceph-rgw-server.log) all just say the same thing: the service attempted to start, it failed to initialize, entered a failed state, service stopped. This repeats. > > See if you can bump the debug log level of the radosgw when starting it. > > https://access.redhat.com/solutions/2085183 > and > https://docs.ceph.com/en/latest/rados/troubleshooting/log-and-debug/#rados-gateway > > --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > May the most significant bit of your life be positive. _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |