Den tis 23 feb. 2021 kl 16:53 skrev Mathew Snyder <mathew.snyder@xxxxxxxxxxxxxx>: > > We have a Red Hat installation of Luminuous (full packages version: 12.2.8-128.1). We're experiencing an issue where the ceph-radosgw service will timeout during initialization and cycle through attempts every five minutes until it seems to just give up. Every other ceph service starts successfully. > > I tried looking at the health of the cluster, but anytime I run a command, whether ceph or radosgw-admin just to see a list of users, it seems to time out as well. > > I've used strace when attempting to start radosgw directly and was presented with a missing keyring error. I would be inclined to think that might be the problem, but wouldn't that also impact all of the other services? No, a missing rgw key would stop only it, and the radosgw-admin command (if run on a box without a global admin key) > I haven't been able to find anything in the logs that would lead me down any paths. Everything I've looked at (journalctl, /var/log/messages, /var/log/ceph/ceph-rgw-server.log) all just say the same thing: the service attempted to start, it failed to initialize, entered a failed state, service stopped. This repeats. See if you can bump the debug log level of the radosgw when starting it. https://access.redhat.com/solutions/2085183 and https://docs.ceph.com/en/latest/rados/troubleshooting/log-and-debug/#rados-gateway -- May the most significant bit of your life be positive. _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx