I thought it might be related to reported issues where the MONs were
specified with IP:PORT, but that can be ruled out.
Does the current monmap match your actual setup? You wrote the keys
are correct, but maybe there's still a keyring left in 'ceph auth ls'?
Zitat von Paul Mezzanini <pfmeec@xxxxxxx>:
Correct, just comma separated IP addresses
--
Paul Mezzanini
Sr Systems Administrator / Engineer, Research Computing
Information & Technology Services
Finance & Administration
Rochester Institute of Technology
o:(585) 475-3245 | pfmeec@xxxxxxx
CONFIDENTIALITY NOTE: The information transmitted, including attachments, is
intended only for the person(s) or entity to which it is addressed and may
contain confidential and/or privileged material. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon this
information by persons or entities other than the intended recipient is
prohibited. If you received this in error, please contact the sender and
destroy any copies of this information.
------------------------
________________________________________
From: Eugen Block <eblock@xxxxxx>
Sent: Friday, November 6, 2020 9:00 AM
To: Paul Mezzanini
Cc: ceph-users@xxxxxxx
Subject: Re: Re: Mon went down and won't come back
So the mon_host line is without a port, correct, just the IP?
Zitat von Paul Mezzanini <pfmeec@xxxxxxx>:
Relevant ceph.conf file lines:
[global]
mon initial members = ceph-mon-01,ceph-mon-03
mon host = IPFor01,IPFor03
mon max pg per osd = 400
mon pg warn max object skew = -1
[mon]
mon allow pool delete = true
ceph config has:
global advanced mon_max_pg_per_osd
400
global advanced mon_pg_warn_max_object_skew
-1.000000
global dev
mon_warn_on_pool_pg_num_not_power_of_two false
mon advanced mon_allow_pool_delete
true
I'm slowly pulling it all into ceph config and I just haven't sat
down to verify it and deploy the stub config everywhere. Non power
of two is set because i'm slowly walking a pool back to a lower PG
num and I was sick of the health warn :) (same with max pg per osd
but I'm well under 400 now so I could purge that line)
Again, lightly sanitized. The actual IP's do match forward and reverse DNS.
--
Paul Mezzanini
Sr Systems Administrator / Engineer, Research Computing
Information & Technology Services
Finance & Administration
Rochester Institute of Technology
o:(585) 475-3245 | pfmeec@xxxxxxx
CONFIDENTIALITY NOTE: The information transmitted, including attachments, is
intended only for the person(s) or entity to which it is addressed and may
contain confidential and/or privileged material. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon this
information by persons or entities other than the intended recipient is
prohibited. If you received this in error, please contact the sender and
destroy any copies of this information.
------------------------
________________________________________
From: Eugen Block <eblock@xxxxxx>
Sent: Friday, November 6, 2020 3:41 AM
To: ceph-users@xxxxxxx
Subject: Re: Mon went down and won't come back
Hi,
can you share your ceph.conf (mon section)?
Zitat von Paul Mezzanini <pfmeec@xxxxxxx>:
Hi everyone,
I figure it's time to pull in more brain power on this one. We had
an NVMe mostly die in one of our monitors and it caused the write
latency for the machine to spike. Ceph did the RightThing(tm) and
when it lost quorum on that machine it was ignored. I pulled the
bad drive out of the array and tried to bring the mon and mgr back
in (our monitors double-duty as managers).
The manager came up 0 problems but the monitor got stuck probing.
I removed the bad host from the monmap and stood up a new one on an
OSD node to get back to 3 active. That new node added perfectly
using the same methods I've tried on the old one.
Network appears to be clean between all hosts. Packet captures show
them chatting just fine. Since we are getting ready to upgrade from
RHEL7 to RHEL8 I took this as an opportunity to reinstall the
monitor as an 8 box to get that process rolling. Box is now on
RHEL8 with no changes to how ceph-mon is acting.
I install machines with a kickstart and use our own ansible roles to
get it 95% into service. I then follow the manual install
instructions
(https://docs.ceph.com/en/latest/rados/operations/add-or-rm-mons/#adding-monitors).
Time is in sync, /var/lib/ceph/mon/* is owned by the right UID, keys
are in sync, configs are in sync. I pulled the old mon out of "mon
initial members" and "mon host". `nc` can talk to all the ports in
question and we've tried it with firewalld off as well (ditto with
selinux). Cleaned up some stale DNS and even tried a different IP
(same DNS name). I started all of this with 14.2.12 but .13 was
released while debugging so I've got that on the broken monitor at
the moment.
I manually start the daemon in debug mode (/usr/bin/ceph-mon -d
--cluster ceph --id ceph-mon-02 --setuser ceph --setgroup ceph)
until it's joined in then use the systemd scripts to start it once
it's clean. The current state is:
(Lightly sanitized output)
:snip:
2020-11-04 11:38:57.049 7f4232fb3540 0 mon.ceph-mon-02 does not
exist in monmap, will attempt to join an existing cluster
2020-11-04 11:38:57.049 7f4232fb3540 0 using public_addr
v2:Num.64:0/0 -> [v2:Num.64:3300/0,v1:Num.64:6789/0]
2020-11-04 11:38:57.050 7f4232fb3540 0 starting mon.ceph-mon-02
rank -1 at public addrs [v2:Num.64:3300/0,v1:Num.64:6789/0] at bind
addrs [v2:Num.64:3300/0,v1:Num.64:6789/0] mon_data
/var/lib/ceph/mon/ceph-ceph-mon-02 fsid
8514c8d5-4cd3-4dee-b460-27633e3adb1a
2020-11-04 11:38:57.051 7f4232fb3540 1 mon.ceph-mon-02@-1(???) e25
preinit fsid 8514c8d5-4cd3-4dee-b460-27633e3adb1a
2020-11-04 11:38:57.051 7f4232fb3540 1 mon.ceph-mon-02@-1(???) e25
initial_members ceph-mon-01,ceph-mon-03, filtering seed monmap
2020-11-04 11:38:57.051 7f4232fb3540 0 mon.ceph-mon-02@-1(???).mds
e430081 new map
2020-11-04 11:38:57.051 7f4232fb3540 0 mon.ceph-mon-02@-1(???).mds
e430081 print_map
:snip:
2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd
e1198618 crush map has features 288514119978713088, adjusting msgr
requires
2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd
e1198618 crush map has features 288514119978713088, adjusting msgr
requires
2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd
e1198618 crush map has features 3314933069571702784, adjusting msgr
requires
2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd
e1198618 crush map has features 288514119978713088, adjusting msgr
requires
2020-11-04 11:38:57.054 7f4232fb3540 1
mon.ceph-mon-02@-1(???).paxosservice(auth 54141..54219) refresh
upgraded, format 0 -> 3
2020-11-04 11:38:57.069 7f421d891700 1 mon.ceph-mon-02@-1(probing)
e25 handle_auth_request failed to assign global_id
^^^ last line repeated every few seconds until process killed
I've exhausted everything I can think of so I've just been doing the
scientific shotgun (one slug at a time) approach to see what
changes. Does anyone else have any ideas?
--
Paul Mezzanini
Sr Systems Administrator / Engineer, Research Computing
Information & Technology Services
Finance & Administration
Rochester Institute of Technology
o:(585) 475-3245 | pfmeec@xxxxxxx
CONFIDENTIALITY NOTE: The information transmitted, including
attachments, is
intended only for the person(s) or entity to which it is addressed and may
contain confidential and/or privileged material. Any review,
retransmission,
dissemination or other use of, or taking of any action in reliance
upon this
information by persons or entities other than the intended recipient is
prohibited. If you received this in error, please contact the sender and
destroy any copies of this information.
------------------------
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
