Hi,
on octopus 15.2.4 I have an issue with cephfs tag auth. The following
works fine:
client.f9desktop
key: ....
caps: [mds] allow rw
caps: [mon] allow r
caps: [osd] allow rw pool=cephfs_data, allow rw pool=ssd_data,
allow rw pool=fast_data, allow rw pool=arich_data, allow rw
pool=ecfast_data
but this one does not.
client.f9desktopnew
key: ....
caps: [mds] allow rw
caps: [mon] allow r
caps: [osd] allow rw tag cephfs data=cephfs
For the 2nd, mds works, files can be created or removed, but client
read/write (native client, kernel version 5.7.4) fails with I/O error,
so osd part does not seem to be working properly.
Any clues what can be wrong? the cephfs was created in jewel...
Another issue is: if osd caps are updated (adding data pool), then some
clients refresh the caps, but most of them do not, and the only way to
refresh it is to remount the filesystem. working tag would solve it.
Best regards,
Andrej
--
_____________________________________________________________
prof. dr. Andrej Filipcic, E-mail: Andrej.Filipcic@xxxxxx
Department of Experimental High Energy Physics - F9
Jozef Stefan Institute, Jamova 39, P.o.Box 3000
SI-1001 Ljubljana, Slovenia
Tel.: +386-1-477-3674 Fax: +386-1-477-3166
-------------------------------------------------------------
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
