On Wed, Jun 17, 2020 at 8:51 PM Christoph Ackermann <c.ackermann@xxxxxxxxxxxx> wrote: > > Hi all, > > we have a cluster starting from jewel to octopus nowadays. We would like > to enable Upmap but unfortunately there are some old Jewel clients > active. We cannot force Upmap by: ceph osd > set-require-min-compat-client luminous Because of production state, > we must not lose any client. ;-) > > "client": [ > { > "features": "0x27018fb86aa42ada", > "release": "jewel", > "num": 7 > }, > { > "features": "0x3f01cfb8ffadffff", > "release": "luminous", > "num": 6 > } > > The cluster and all clients are v15.2.3 and my assumtion was, that > Centos7 with kernel 3.10 have backported kernel modules. Am i wrong? Hi Christoph, You are right. > > > I also checked Centos7 client with 4.20-ml kernel without success. > Clients always appear as Jewel clients... Fresh Centos8 run as Luminous > client as expected. Reporting as jewel is an unfortunate technical wart, see http://lists.ceph.com/pipermail/ceph-users-ceph.com/2018-May/027002.html https://spinics.net/lists/ceph-users/msg55419.html > > BTW: Is there a trick to identify Jewel clients by IP address / Hostname? Eugen's suggestion (mon sessions) is correct, but you shouldn't need it. Those 0x27018fb86aa42ada clients do support upmap. Thanks, Ilya _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx