Hi,
I believe this command shows the desired output:
ceph daemon mon.<id> sessions
Zitat von Christoph Ackermann <c.ackermann@xxxxxxxxxxxx>:
Hi all,
we have a cluster starting from jewel to octopus nowadays. We would like
to enable Upmap but unfortunately there are some old Jewel clients
active. We cannot force Upmap by: ceph osd
set-require-min-compat-client luminous Because of production state,
we must not lose any client. ;-)
"client": [
{
"features": "0x27018fb86aa42ada",
"release": "jewel",
"num": 7
},
{
"features": "0x3f01cfb8ffadffff",
"release": "luminous",
"num": 6
}
The cluster and all clients are v15.2.3 and my assumtion was, that
Centos7 with kernel 3.10 have backported kernel modules. Am i wrong?
I also checked Centos7 client with 4.20-ml kernel without success.
Clients always appear as Jewel clients... Fresh Centos8 run as Luminous
client as expected.
BTW: Is there a trick to identify Jewel clients by IP address / Hostname?
Thank you much,
Christoph
--
--
Christoph Ackermann | System Engineer
INFOSERVE GmbH | Am Felsbrunnen 15 | D-66119 Saarbrücken
Fon +49 (0)681 88008-59 | Fax +49 (0)681 88008-33
| mailto:C.Ackermann@xxxxxxxxxxxx | https://www.infoserve.de
INFOSERVE Datenschutzhinweise: https://infoserve.de/datenschutz
Handelsregister: Amtsgericht Saarbrücken, HRB 11001 | Erfüllungsort:
Saarbrücken
Geschäftsführer: Dr. Stefan Leinenbach | Ust-IdNr.: DE168970599
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx
