Re: Ceph Nautius not working after setting MTU 9000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Does your ping work or not?


On Sun, May 24, 2020 at 6:53 AM Amudhan P <amudhan83@xxxxxxxxx> wrote:

> Yes, I have set setting on the switch side also.
>
> On Sat 23 May, 2020, 6:47 PM Khodayar Doustar, <doustar@xxxxxxxxxxxx>
> wrote:
>
>> Problem should be with network. When you change MTU it should be changed
>> all over the network, any single hup on your network should speak and
>> accept 9000 MTU packets. you can check it on your hosts with "ifconfig"
>> command and there is also equivalent commands for other network/security
>> devices.
>>
>> If you have just one node which it not correctly configured for MTU 9000
>> it wouldn't work.
>>
>> On Sat, May 23, 2020 at 2:30 PM sinan@xxxxxxxx <sinan@xxxxxxxx> wrote:
>>
>>> Can the servers/nodes ping eachother using large packet sizes? I guess
>>> not.
>>>
>>> Sinan Polat
>>>
>>> > Op 23 mei 2020 om 14:21 heeft Amudhan P <amudhan83@xxxxxxxxx> het
>>> volgende geschreven:
>>> >
>>> > In OSD logs "heartbeat_check: no reply from OSD"
>>> >
>>> >> On Sat, May 23, 2020 at 5:44 PM Amudhan P <amudhan83@xxxxxxxxx>
>>> wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> I have set Network switch with MTU size 9000 and also in my netplan
>>> >> configuration.
>>> >>
>>> >> What else needs to be checked?
>>> >>
>>> >>
>>> >>> On Sat, May 23, 2020 at 3:39 PM Wido den Hollander <wido@xxxxxxxx>
>>> wrote:
>>> >>>
>>> >>>
>>> >>>
>>> >>>> On 5/23/20 12:02 PM, Amudhan P wrote:
>>> >>>> Hi,
>>> >>>>
>>> >>>> I am using ceph Nautilus in Ubuntu 18.04 working fine wit MTU size
>>> 1500
>>> >>>> (default) recently i tried to update MTU size to 9000.
>>> >>>> After setting Jumbo frame running ceph -s is timing out.
>>> >>>
>>> >>> Ceph can run just fine with an MTU of 9000. But there is probably
>>> >>> something else wrong on the network which is causing this.
>>> >>>
>>> >>> Check the Jumbo Frames settings on all the switches as well to make
>>> sure
>>> >>> they forward all the packets.
>>> >>>
>>> >>> This is definitely not a Ceph issue.
>>> >>>
>>> >>> Wido
>>> >>>
>>> >>>>
>>> >>>> regards
>>> >>>> Amudhan P
>>> >>>> _______________________________________________
>>> >>>> ceph-users mailing list -- ceph-users@xxxxxxx
>>> >>>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>> >>>>
>>> >>> _______________________________________________
>>> >>> ceph-users mailing list -- ceph-users@xxxxxxx
>>> >>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>> >>>
>>> >>
>>> > _______________________________________________
>>> > ceph-users mailing list -- ceph-users@xxxxxxx
>>> > To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>>
>>> _______________________________________________
>>> ceph-users mailing list -- ceph-users@xxxxxxx
>>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>>
>>
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux