On 02/08/2020 11:34 PM, Gesiel Galvão Bernardes wrote: > Hi, > > Em qui., 6 de fev. de 2020 às 18:56, Mike Christie <mchristi@xxxxxxxxxx > <mailto:mchristi@xxxxxxxxxx>> escreveu: > > On 02/05/2020 07:03 AM, Gesiel Galvão Bernardes wrote: > > Em dom., 2 de fev. de 2020 às 00:37, Gesiel Galvão Bernardes > > <gesiel.bernardes@xxxxxxxxx <mailto:gesiel.bernardes@xxxxxxxxx> > <mailto:gesiel.bernardes@xxxxxxxxx > <mailto:gesiel.bernardes@xxxxxxxxx>>> escreveu: > > > > Hi, > > > > Just now was possible continue this. Below is the information > > required. Thanks advan > > > Hey, sorry for the late reply. I just back from PTO. > > > > > esxcli storage nmp device list -d > naa.6001405ba48e0b99e4c418ca13506c8e > > naa.6001405ba48e0b99e4c418ca13506c8e > > Device Display Name: LIO-ORG iSCSI Disk > > (naa.6001405ba48e0b99e4c418ca13506c8e) > > Storage Array Type: VMW_SATP_ALUA > > Storage Array Type Device Config: {implicit_support=on; > > explicit_support=off; explicit_allow=on; alua_followover=on; > > action_OnRetryErrors=on; {TPG_id=1,TPG_state=ANO}} > > Path Selection Policy: VMW_PSP_MRU > > Path Selection Policy Device Config: Current > Path=vmhba68:C0:T0:L0 > > Path Selection Policy Device Custom Config: > > Working Paths: vmhba68:C0:T0:L0 > > Is USB: false > > ........ > > > Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x2 0x4 0xa. > Act:FAILOVER > > > Are you sure you are using tcmu-runner 1.4? Is that the actual daemon > reversion running? Did you by any chance install the 1.4 rpm, but you/it > did not restart the daemon? The error code above is returned in 1.3 and > earlier. > > You are probably hitting a combo of 2 issues. > > We had only listed ESX 6.5 in the docs you probably saw, and in 6.7 the > value of action_OnRetryErrors defaulted to on instead of off. You should > set this back to off. > > You should also upgrade to the current version of tcmu-runner 1.5.x. It > should fix the issue you are hitting, so non IO commands like inquiry, > RTPG, etc are executed while failing over/back, so you would not hit the > problem where path initialization and path testing IO is failed causing > the path to marked as failed. > > > I updated tcmu-runner to 1.5.2, and change action_OnRetryErrors to off, > but the problem continue 😭 > > Attached is vmkernel.log. > When you stopped the iscsi gw at around 2020-02-09T01:51:25.820Z, how many paths did your device have? Did: esxcli storage nmp path list -d your_device report only one path? Did esxcli iscsi session connection list show a iscsi connection to each gw? The logs look like when you brought the gw down, we lost the only path we had. We then went into all paths down, so IO could not execute. It looks like the gw was brought back up at the end of the log and the path seem to have got added back. _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |