Hi, Em qui., 6 de fev. de 2020 às 18:56, Mike Christie <mchristi@xxxxxxxxxx> escreveu: > On 02/05/2020 07:03 AM, Gesiel Galvão Bernardes wrote: > > Em dom., 2 de fev. de 2020 às 00:37, Gesiel Galvão Bernardes > > <gesiel.bernardes@xxxxxxxxx <mailto:gesiel.bernardes@xxxxxxxxx>> > escreveu: > > > > Hi, > > > > Just now was possible continue this. Below is the information > > required. Thanks advan > > > Hey, sorry for the late reply. I just back from PTO. > > > > > esxcli storage nmp device list -d > naa.6001405ba48e0b99e4c418ca13506c8e > > naa.6001405ba48e0b99e4c418ca13506c8e > > Device Display Name: LIO-ORG iSCSI Disk > > (naa.6001405ba48e0b99e4c418ca13506c8e) > > Storage Array Type: VMW_SATP_ALUA > > Storage Array Type Device Config: {implicit_support=on; > > explicit_support=off; explicit_allow=on; alua_followover=on; > > action_OnRetryErrors=on; {TPG_id=1,TPG_state=ANO}} > > Path Selection Policy: VMW_PSP_MRU > > Path Selection Policy Device Config: Current Path=vmhba68:C0:T0:L0 > > Path Selection Policy Device Custom Config: > > Working Paths: vmhba68:C0:T0:L0 > > Is USB: false > > ........ > > > Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x2 0x4 0xa. Act:FAILOVER > > > Are you sure you are using tcmu-runner 1.4? Is that the actual daemon > reversion running? Did you by any chance install the 1.4 rpm, but you/it > did not restart the daemon? The error code above is returned in 1.3 and > earlier. > > You are probably hitting a combo of 2 issues. > > We had only listed ESX 6.5 in the docs you probably saw, and in 6.7 the > value of action_OnRetryErrors defaulted to on instead of off. You should > set this back to off. > > You should also upgrade to the current version of tcmu-runner 1.5.x. It > should fix the issue you are hitting, so non IO commands like inquiry, > RTPG, etc are executed while failing over/back, so you would not hit the > problem where path initialization and path testing IO is failed causing > the path to marked as failed. > > > I updated tcmu-runner to 1.5.2, and change action_OnRetryErrors to off, but the problem continue 😭 Attached is vmkernel.log. Regards Gesiel _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |