Re: OSD up takes 15 minutes after machine restarts

[Igor Fedotov <ifedotov@xxxxxxx>]

No, bluestore_fsck_on_mount_deep is applied when bluestore_fsck_on_mount is set to true only.

Hence there is no fsck on mount in your case.

Thanks,

Igor

On 1/20/2020 10:25 AM, huxiaoyu@xxxxxxxxxxxx wrote:

HI, Igor,

does this could cause the problem?

---

huxiaoyu@xxxxxxxxxxxx

 

From: Igor Fedotov

Date: 2020-01-19 11:41

To: huxiaoyu@xxxxxxxxxxxx; ceph-users

Subject: Re: OSD up takes 15 minutes after machine restarts

Hi Samuel,

wondering if you have bluestore_fsck_on_mount option set to true? Can you see high read load over OSD device(s) during the startup?

If so it might be fsck running which takes that long.

Thanks,

Igor

On 1/19/2020 11:53 AM, huxiaoyu@xxxxxxxxxxxx wrote:

Dear folks,

I had a strange situation with 3-node Ceph cluster on Luminous 12.2.12 with bluestore. Each machine has 5 OSDs on HDD, and each OSD uses a 30GB DB/WAL partition on SSD. At the beginning without much data, OSDs can quickly up if one node restarts. 

Then I ran 4-day long stress tests with vdbench, and then I restarts one node, and to my surprise, OSDs on that node takes ca 15 minutes to turn into up state. How can i speed up the OSD UP process ?

thanks,

Samuel

---

huxiaoyu@xxxxxxxxxxxx

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com