repair took almost 6 hours..but after repair, still sees the scrub errs.
On Wed, Sep 25, 2019 at 5:11 AM Brad Hubbard <bhubbard@xxxxxxxxxx> wrote:
On Tue, Sep 24, 2019 at 10:51 PM M Ranga Swami Reddy
<swamireddy@xxxxxxxxx> wrote:
>
> Interestingly - "rados list-inconsistent-obj ${PG} --format=json" not showing any objects inconsistent-obj.
> And also "rados list-missing-obj ${PG} --format=json" also not showing any missing or unfound objects.
Complete a scrub of ${PG} just before you run these commands.
>
> Thanks
> Swami
>
> On Mon, Sep 23, 2019 at 8:18 PM Robert LeBlanc <robert@xxxxxxxxxxxxx> wrote:
>>
>> On Thu, Sep 19, 2019 at 4:34 AM M Ranga Swami Reddy
>> <swamireddy@xxxxxxxxx> wrote:
>> >
>> > Hi-Iam using ceph 12.2.11. here I am getting a few scrub errors. To fix these scrub error I ran the "ceph pg repair <pg_id>".
>> > But scrub error not going and the repair is talking long time like 8-12 hours.
>>
>> Depending on the size of the PGs and how active the cluster is, it
>> could take a long time as it takes another deep scrub to happen to
>> clear the error status after a repair. Since it is not going away,
>> either the problem is too complicated to automatically repair and
>> needs to be done by hand, or the problem is repaired and when it
>> deep-scrubs to check it, the problem has reappeared or another problem
>> was found and the disk needs to be replaced.
>>
>> Try running:
>> rados list-inconsistent-obj ${PG} --format=json
>>
>> and see what the exact problems are.
>> ----------------
>> Robert LeBlanc
>> PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2 FA62 B9F1
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Cheers,
Brad
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
