I found a workarount for this problem. As described by Manuel Rios in https://tracker.ceph.com/issues/40282 , the workaround is to include configs: public_network = x.x.x.x cluster_network = y.y.y.y also into ceph.conf on ceph client machines. On Tue, Jul 2, 2019 at 11:28 AM Vandeir Eduardo <vandeir.eduardo@xxxxxxxxx> wrote: > > Hi, > > on client machines, when I use the command rbd, for example, rbd ls > poolname, this message is always displayed: > > 2019-07-02 11:18:10.613 7fb2eaffd700 -1 set_mon_vals failed to set > cluster_network = 10.1.2.0/24: Configuration option 'cluster_network' > may not be modified at runtime > 2019-07-02 11:18:10.613 7fb2eaffd700 -1 set_mon_vals failed to set > public_network = 10.1.1.0/24: Configuration option 'public_network' > may not be modified at runtime > 2019-07-02 11:18:10.621 7fb2ea7fc700 -1 set_mon_vals failed to set > cluster_network = 10.1.2.0/24: Configuration option 'cluster_network' > may not be modified at runtime > 2019-07-02 11:18:10.621 7fb2ea7fc700 -1 set_mon_vals failed to set > public_network = 10.1.1.0/24: Configuration option 'public_network' > may not be modified at runtime > > After this, rbd image names are displayed normally. > > If I run this command on a ceph node, this "warning/information???" > messages are not displayed. Is there a way to get ride of this? Its > really annoying. > > The only thread I found about something similar was this: > https://www.spinics.net/lists/ceph-devel/msg42657.html > > I already tryied the commands "ceph config rm global cluster_network" > and "ceph config rm global public_network", but the messages still > persist. > > Any ideas? _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |