Hi, Thank you all for you quick answer. I think that will solve our problem. This is what we came up with this : rbd -c /etc/ceph/Oceph.conf --keyring /etc/ceph/Oceph.client.admin.keyring export rbd/disk_test - | rbd -c /etc/ceph/Nceph.conf --keyring /etc/ceph/Nceph.client.admin.keyring import - rbd/disk_test This rbd image is a test with only 5Gb of datas inside of it. Unfortunately the command seems to be stuck and nothing happens, both ports 7800 / 6789 / 22. We can't find no logs on any monitors. Thanks ! -----Message d'origine----- De : ceph-users <ceph-users-bounces@xxxxxxxxxxxxxx> De la part de Jason Dillaman Envoyé : 04 June 2019 14:11 À : Burkhard Linke <Burkhard.Linke@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> Cc : ceph-users <ceph-users@xxxxxxxxxxxxxx> Objet : Re: Multiple rbd images from different clusters On Tue, Jun 4, 2019 at 8:07 AM Jason Dillaman <jdillama@xxxxxxxxxx> wrote: > > On Tue, Jun 4, 2019 at 4:45 AM Burkhard Linke > <Burkhard.Linke@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > > > > Hi, > > > > On 6/4/19 10:12 AM, CUZA Frédéric wrote: > > > > Hi everyone, > > > > > > > > We want to migrate datas from one cluster (Hammer) to a new one (Mimic). We do not wish to upgrade the actual cluster as all the hardware is EOS and we upgrade the configuration of the servers. > > > > We can’t find a “proper” way to mount two rbd images from two different cluster on the same host. > > > > Does anyone know what is the “good” procedure to achieve this ? > > Copy your "/etc/ceph/ceph.conf" and associated keyrings for both > clusters to a single machine (preferably running a Mimic "rbd" client) > under "/etc/ceph/<cluster-name>.conf" and > "/etc/ceph/<cluster-name>.client.<id>.keyring". > > You can then use "rbd -c <old cluster name> export --export-format 2 > <image-spec> - | rbd -c <new cluster name> import --export-format=2 - > <image-spec>". The "--export-format=2" option will also copy all > associated snapshots with the images. If you don't want/need the > snapshots, just drop that optional. That "-c" should be "--cluster" if specifying by name, otherwise with "-c" it's the full path to the two different conf files. > > > > Just my 2 ct: > > > > the 'rbd' commands allows specifying a configuration file (-c). You need to setup two configuration files, one for each cluster. You can also use two different cluster names (--cluster option). AFAIK the name is only used to locate the configuration file. I'm not sure how well the kernel works with mapping RBDs from two different cluster..... > > > > > > If you only want to transfer RBDs from one cluster to another, you do not need to map and mount them; the 'rbd' command has the sub commands 'export' and 'import'. You can pipe them to avoid writing data to a local disk. This should be the fastest way to transfer the RBDs. > > > > > > Regards, > > > > Burkhard > > > > -- > > Dr. rer. nat. Burkhard Linke > > Bioinformatics and Systems Biology > > Justus-Liebig-University Giessen > > 35392 Giessen, Germany > > Phone: (+49) (0)641 9935810 > > > > _______________________________________________ > > ceph-users mailing list > > ceph-users@xxxxxxxxxxxxxx > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > -- > Jason -- Jason _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |