Hi, pg-upmap-items became more strict in v12.2.11 when validating upmaps. E.g., it now won't let you put two PGs in the same rack if the crush rule doesn't allow it. Where are OSDs 23 and 123 in your cluster? What is the relevant crush rule? -- dan On Wed, Feb 27, 2019 at 9:17 PM Kári Bertilsson <karibertils@xxxxxxxxx> wrote: > > Hello > > I am trying to diagnose why upmap stopped working where it was previously working fine. > > Trying to move pg 41.1 to 123 has no effect and seems to be ignored. > > # ceph osd pg-upmap-items 41.1 23 123 > set 41.1 pg_upmap_items mapping to [23->123] > > No rebalacing happens and if i run it again it shows the same output every time. > > I have in config > debug mgr = 4/5 > debug mon = 4/5 > > Paste from mon & mgr logs. Also output from "ceph osd dump" > https://pastebin.com/9VrT4YcU > > > I have run "ceph osd set-require-min-compat-client luminous" long time ago. And all servers running ceph have been rebooted numerous times since then. > But somehow i am still seeing "min_compat_client jewel". I believe that upmap was previously working anyway with that "jewel" line present. > > I see no indication in any logs why the upmap commands are being ignored. > > Any suggestions on how to debug further or what could be the issue ? > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |