Re: [Ceph-large] Help with setting device-class rule on pool without causing data to move

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Recently Dan from CERN showcased a interesting way.

Use upmap to map all PGs to the current OSDs and then change the CRUSH topology.

Then enable the balancer module and have it slowly move the PGs.

Yes, you will rebalance, but it can be done over a very long period with Health OK in between.

Wido

Op 30 dec. 2018 om 21:16 heeft David C <dcsysengineer@xxxxxxxxx> het volgende geschreven:

Hi All

I'm trying to set the existing pools in a Luminous cluster to use the hdd device-class but without moving data around. If I just create a new rule using the hdd class and set my pools to use that new rule it will cause a huge amount of data movement even though the pgs are all already on HDDs.

There is a thread on ceph-large [1] which appears to have the solution but I can't get my head around what I need to do. I'm not too clear on which IDs I need to swap. Could someone give me some pointers on this please?




_______________________________________________
Ceph-large mailing list
Ceph-large@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-large-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux