Those units don't get triggered out of nowhere, there has to be a partition table with magic GUIDs or a fstab or something to cause them to be triggered. The better way should be to get rid of that instead of overriding the ceph-disk service instances, I think. Given dev-sdh1.device is trying to start, I suspect you have them in /etc/fstab. You should have a look around /etc to see if you have any stray references to those devices or old ceph-disk OSDs. On 11/6/18 1:37 AM, Hayashida, Mami wrote: > Alright. Thanks -- I will try this now. > > On Mon, Nov 5, 2018 at 11:36 AM, Alfredo Deza <adeza@xxxxxxxxxx > <mailto:adeza@xxxxxxxxxx>> wrote: > > On Mon, Nov 5, 2018 at 11:33 AM Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > > > > But I still have 50 other Filestore OSDs on the same node, though. Wouldn't doing it all at once (by not identifying the osd-id) be a problem for those? I have not migrated data out of those 50 OSDs yet. > > Sure, like I said, if you want to do them one by one, then your > initial command is fine. > > > > > On Mon, Nov 5, 2018 at 11:31 AM, Alfredo Deza <adeza@xxxxxxxxxx > <mailto:adeza@xxxxxxxxxx>> wrote: > >> > >> On Mon, Nov 5, 2018 at 11:24 AM Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > >> > > >> > Thank you for all of your replies. Just to clarify... > >> > > >> > 1. Hector: I did unmount the file system if what you meant was > unmounting the /var/lib/ceph/osd/ceph-$osd-id for those disks (in > my case osd.60-69) before running the ceph-volume lvm zap command > >> > > >> > 2. Alfredo: so I can at this point run the "ln" command > (basically getting rid of the symbolic link) for each of those OSDs > I have converted? For example > >> > > >> > ln -sf /dev/null /etc/systemc/system/ceph-disk@60.service > >> That will take care of OSD 60. This is fine if you want to do > them one > >> by one. To affect everything from ceph-disk, you would need to: > >> > >> ln -sf /dev/null /etc/systemd/system/ceph-disk@.service > >> > >> > > >> > Then reboot? > >> > > >> > > >> > On Mon, Nov 5, 2018 at 11:17 AM, Alfredo Deza <adeza@xxxxxxxxxx > <mailto:adeza@xxxxxxxxxx>> wrote: > >> >> > >> >> On Mon, Nov 5, 2018 at 10:43 AM Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > >> >> > > >> >> > Additional info -- I know that > /var/lib/ceph/osd/ceph-{60..69} are not mounted at this point (i.e. > mount | grep ceph-60, and 61-69, returns nothing.). They don't show > up when I run "df", either. > >> >> > > >> >> > On Mon, Nov 5, 2018 at 10:15 AM, Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > >> >> >> > >> >> >> Well, over the weekend the whole server went down and is > now in the emergency mode. (I am running Ubuntu 16.04). When I run > "journalctl -p err -xb" I see that > >> >> >> > >> >> >> systemd[1]: Timed out waiting for device dev-sdh1.device. > >> >> >> -- Subject: Unit dev-sdh1.device has failed > >> >> >> -- Defined-By: systemd > >> >> >> -- Support: http://lists.freeddesktop.org/.. > <http://lists.freeddesktop.org/..>.. > >> >> >> -- > >> >> >> -- Unit dev-sdh1.device has failed. > >> >> >> > >> >> >> > >> >> >> I see this for every single one of the newly-converted > Bluestore OSD disks (/dev/sd{h..q}1). > >> >> > >> >> This will happen with stale ceph-disk systemd units. You can > disable those with: > >> >> > >> >> ln -sf /dev/null /etc/systemd/system/ceph-disk@.service > >> >> > >> >> > >> >> >> > >> >> >> > >> >> >> -- > >> >> >> > >> >> >> On Mon, Nov 5, 2018 at 9:57 AM, Alfredo Deza > <adeza@xxxxxxxxxx <mailto:adeza@xxxxxxxxxx>> wrote: > >> >> >>> > >> >> >>> On Fri, Nov 2, 2018 at 5:04 PM Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > >> >> >>> > > >> >> >>> > I followed all the steps Hector suggested, and almost > everything seems to have worked fine. I say "almost" because one > out of the 10 osds I was migrating could not be activated even > though everything up to that point worked just as well for that osd > as the other ones. Here is the output for that particular failure: > >> >> >>> > > >> >> >>> > ***** > >> >> >>> > ceph-volume lvm activate --all > >> >> >>> > ... > >> >> >>> > --> Activating OSD ID 67 FSID 17cd6755-76f9-4160-906c-XXXXXX > >> >> >>> > Running command: mount -t tmpfs tmpfs > /var/lib/ceph/osd/ceph-67 > >> >> >>> > --> Absolute path not found for executable: restorecon > >> >> >>> > --> Ensure $PATH environment variable contains common > executable locations > >> >> >>> > Running command: ceph-bluestore-tool --cluster=ceph > prime-osd-dir --dev /dev/hdd67/data67 --path /var/lib/ceph/osd/ceph-67 > >> >> >>> > stderr: failed to read label for /dev/hdd67/data67: (2) > No such file or directory > >> >> >>> > --> RuntimeError: command returned non-zero exit status: > >> >> >>> > >> >> >>> I wonder if the /dev/sdo device where hdd67/data67 is > located is > >> >> >>> available, or if something else is missing. You could try > poking > >> >> >>> around with `lvs` and see if that LV shows up, also > `ceph-volume lvm > >> >> >>> list hdd67/data67` can help here because it > >> >> >>> groups OSDs to LVs. If you run `ceph-volume lvm list > --format=json > >> >> >>> hdd67/data67` you will also see all the metadata stored in it. > >> >> >>> > >> >> >>> Would be interesting to see that output to verify things > exist and are > >> >> >>> usable for OSD activation. > >> >> >>> > >> >> >>> > > >> >> >>> > ******* > >> >> >>> > I then checked to see if the rest of the migrated OSDs > were back in by calling the ceph osd tree command from the admin > node. Since they were not, I tried to restart the first of the 10 > newly migrated Bluestore osds by calling > >> >> >>> > > >> >> >>> > ******* > >> >> >>> > systemctl start ceph-osd@60 > >> >> >>> > > >> >> >>> > At that point, not only this particular service could > not be started, but ALL the OSDs (daemons) on the entire node shut > down!!!!! > >> >> >>> > > >> >> >>> > ****** > >> >> >>> > root@osd1:~# systemctl status ceph-osd@60 > >> >> >>> > ● ceph-osd@60.service - Ceph object storage daemon osd.60 > >> >> >>> > Loaded: loaded > (/lib/systemd/system/ceph-osd@.service; enabled-runtime; vendor > preset: enabled) > >> >> >>> > Active: inactive (dead) since Fri 2018-11-02 15:47:20 > EDT; 1h 9min ago > >> >> >>> > Process: 3473621 ExecStart=/usr/bin/ceph-osd -f > --cluster ${CLUSTER} --id %i --setuser ceph --setgroup ceph > (code=exited, status=0/SUCCESS) > >> >> >>> > Process: 3473147 > ExecStartPre=/usr/lib/ceph/ceph-osd-prestart.sh --cluster ${CLUSTER} > --id %i (code=exited, status=0/SUCCESS) > >> >> >>> > Main PID: 3473621 (code=exited, status=0/SUCCESS) > >> >> >>> > > >> >> >>> > Oct 29 15:57:53 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-10-29 > 15:57:53.868856 7f68adaece00 -1 osd.60 48106 log_to_monitors > {default=true} > >> >> >>> > Oct 29 15:57:53 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-10-29 > 15:57:53.874373 7f68adaece00 -1 osd.60 48106 > mon_cmd_maybe_osd_create fail: 'you must complete the upgrade and > 'ceph osd require-osd-release luminous' before using crush device > classes': (1) Operation not permitted > >> >> >>> > Oct 30 06:25:01 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-10-30 > 06:25:01.961720 7f687feb3700 -1 received signal: Hangup from PID: > 3485955 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Oct 31 06:25:02 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-10-31 > 06:25:02.110898 7f687feb3700 -1 received signal: Hangup from PID: > 3500945 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Nov 01 06:25:02 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-11-01 > 06:25:02.101548 7f687feb3700 -1 received signal: Hangup from PID: > 3514774 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Nov 02 06:25:02 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-11-02 > 06:25:01.997557 7f687feb3700 -1 received signal: Hangup from PID: > 3528128 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Nov 02 15:47:16 osd1.oxxxxx.uky.edu > <http://osd1.oxxxxx.uky.edu> ceph-osd[3473621]: 2018-11-02 > 15:47:16.322229 7f687feb3700 -1 received signal: Terminated from > PID: 1 task name: /lib/systemd/systemd --system --deserialize 20 UID: 0 > >> >> >>> > Nov 02 15:47:16 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-11-02 > 15:47:16.322253 7f687feb3700 -1 osd.60 48504 *** Got signal > Terminated *** > >> >> >>> > Nov 02 15:47:16 osd1.xxxxx.uky.edu > <http://osd1.xxxxx.uky.edu> ceph-osd[3473621]: 2018-11-02 > 15:47:16.676625 7f687feb3700 -1 osd.60 48504 shutdown > >> >> >>> > Nov 02 16:34:05 osd1.oxxxxx.uky.edu > <http://osd1.oxxxxx.uky.edu> systemd[1]: Stopped Ceph object storage > daemon osd.60. > >> >> >>> > > >> >> >>> > ********** > >> >> >>> > And ere is the output for one of the OSDs (osd.70 still > using Filestore) that shut down right when I tried to start osd.60 > >> >> >>> > > >> >> >>> > ******** > >> >> >>> > > >> >> >>> > root@osd1:~# systemctl status ceph-osd@70 > >> >> >>> > ● ceph-osd@70.service - Ceph object storage daemon osd.70 > >> >> >>> > Loaded: loaded > (/lib/systemd/system/ceph-osd@.service; enabled-runtime; vendor > preset: enabled) > >> >> >>> > Active: inactive (dead) since Fri 2018-11-02 16:34:08 > EDT; 2min 6s ago > >> >> >>> > Process: 3473629 ExecStart=/usr/bin/ceph-osd -f > --cluster ${CLUSTER} --id %i --setuser ceph --setgroup ceph > (code=exited, status=0/SUCCESS) > >> >> >>> > Process: 3473153 > ExecStartPre=/usr/lib/ceph/ceph-osd-prestart.sh --cluster ${CLUSTER} > --id %i (code=exited, status=0/SUCCESS) > >> >> >>> > Main PID: 3473629 (code=exited, status=0/SUCCESS) > >> >> >>> > > >> >> >>> > Oct 29 15:57:51 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-10-29 > 15:57:51.300563 7f530eec2e00 -1 osd.70 pg_epoch: 48095 pg[68.ces1( > empty local-lis/les=47489/47489 n=0 ec=6030/6030 lis/c 47488/47488 > les/c/f 47489/47489/0 47485/47488/47488) [138,70,203]p138(0) r=1 > lpr=0 crt=0'0 unknown NO > >> >> >>> > Oct 30 06:25:01 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-10-30 > 06:25:01.961743 7f52d8e44700 -1 received signal: Hangup from PID: > 3485955 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Oct 31 06:25:02 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-10-31 > 06:25:02.110920 7f52d8e44700 -1 received signal: Hangup from PID: > 3500945 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Nov 01 06:25:02 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-11-01 > 06:25:02.101568 7f52d8e44700 -1 received signal: Hangup from PID: > 3514774 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Nov 02 06:25:02 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-11-02 > 06:25:01.997633 7f52d8e44700 -1 received signal: Hangup from PID: > 3528128 task name: killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd > ceph-fuse radosgw UID: 0 > >> >> >>> > Nov 02 16:34:05 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-11-02 > 16:34:05.607714 7f52d8e44700 -1 received signal: Terminated from > PID: 1 task name: /lib/systemd/systemd --system --deserialize 20 UID: 0 > >> >> >>> > Nov 02 16:34:05 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-11-02 > 16:34:05.607738 7f52d8e44700 -1 osd.70 48535 *** Got signal > Terminated *** > >> >> >>> > Nov 02 16:34:05 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> systemd[1]: Stopping Ceph object storage > daemon osd.70... > >> >> >>> > Nov 02 16:34:05 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> ceph-osd[3473629]: 2018-11-02 > 16:34:05.677348 7f52d8e44700 -1 osd.70 48535 shutdown > >> >> >>> > Nov 02 16:34:08 osd1.xxxx.uky.edu > <http://osd1.xxxx.uky.edu> systemd[1]: Stopped Ceph object storage > daemon osd.70. > >> >> >>> > > >> >> >>> > ************** > >> >> >>> > > >> >> >>> > So, at this point, ALL the OSDs on that node have been > shut down. > >> >> >>> > > >> >> >>> > For your information this is the output of lsblk command > (selection) > >> >> >>> > ***** > >> >> >>> > root@osd1:~# lsblk > >> >> >>> > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > >> >> >>> > sda 8:0 0 447.1G 0 disk > >> >> >>> > ├─ssd0-db60 252:0 0 40G 0 lvm > >> >> >>> > ├─ssd0-db61 252:1 0 40G 0 lvm > >> >> >>> > ├─ssd0-db62 252:2 0 40G 0 lvm > >> >> >>> > ├─ssd0-db63 252:3 0 40G 0 lvm > >> >> >>> > ├─ssd0-db64 252:4 0 40G 0 lvm > >> >> >>> > ├─ssd0-db65 252:5 0 40G 0 lvm > >> >> >>> > ├─ssd0-db66 252:6 0 40G 0 lvm > >> >> >>> > ├─ssd0-db67 252:7 0 40G 0 lvm > >> >> >>> > ├─ssd0-db68 252:8 0 40G 0 lvm > >> >> >>> > └─ssd0-db69 252:9 0 40G 0 lvm > >> >> >>> > sdb 8:16 0 447.1G 0 disk > >> >> >>> > ├─sdb1 8:17 0 40G 0 part > >> >> >>> > ├─sdb2 8:18 0 40G 0 part > >> >> >>> > > >> >> >>> > ..... > >> >> >>> > > >> >> >>> > sdh 8:112 0 3.7T 0 disk > >> >> >>> > └─hdd60-data60 252:10 0 3.7T 0 lvm > >> >> >>> > sdi 8:128 0 3.7T 0 disk > >> >> >>> > └─hdd61-data61 252:11 0 3.7T 0 lvm > >> >> >>> > sdj 8:144 0 3.7T 0 disk > >> >> >>> > └─hdd62-data62 252:12 0 3.7T 0 lvm > >> >> >>> > sdk 8:160 0 3.7T 0 disk > >> >> >>> > └─hdd63-data63 252:13 0 3.7T 0 lvm > >> >> >>> > sdl 8:176 0 3.7T 0 disk > >> >> >>> > └─hdd64-data64 252:14 0 3.7T 0 lvm > >> >> >>> > sdm 8:192 0 3.7T 0 disk > >> >> >>> > └─hdd65-data65 252:15 0 3.7T 0 lvm > >> >> >>> > sdn 8:208 0 3.7T 0 disk > >> >> >>> > └─hdd66-data66 252:16 0 3.7T 0 lvm > >> >> >>> > sdo 8:224 0 3.7T 0 disk > >> >> >>> > └─hdd67-data67 252:17 0 3.7T 0 lvm > >> >> >>> > sdp 8:240 0 3.7T 0 disk > >> >> >>> > └─hdd68-data68 252:18 0 3.7T 0 lvm > >> >> >>> > sdq 65:0 0 3.7T 0 disk > >> >> >>> > └─hdd69-data69 252:19 0 3.7T 0 lvm > >> >> >>> > sdr 65:16 0 3.7T 0 disk > >> >> >>> > └─sdr1 65:17 0 3.7T 0 part > /var/lib/ceph/osd/ceph-70 > >> >> >>> > ..... > >> >> >>> > > >> >> >>> > As a Ceph novice, I am totally clueless about the next > step at this point. Any help would be appreciated. > >> >> >>> > > >> >> >>> > On Thu, Nov 1, 2018 at 3:16 PM, Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > >> >> >>> >> > >> >> >>> >> Thank you, both of you. I will try this out very soon. > >> >> >>> >> > >> >> >>> >> On Wed, Oct 31, 2018 at 8:48 AM, Alfredo Deza > <adeza@xxxxxxxxxx <mailto:adeza@xxxxxxxxxx>> wrote: > >> >> >>> >>> > >> >> >>> >>> On Wed, Oct 31, 2018 at 8:28 AM Hayashida, Mami > <mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx>> wrote: > >> >> >>> >>> > > >> >> >>> >>> > Thank you for your replies. So, if I use the method > Hector suggested (by creating PVs, VGs.... etc. first), can I add > the --osd-id parameter to the command as in > >> >> >>> >>> > > >> >> >>> >>> > ceph-volume lvm prepare --bluestore --data > hdd0/data0 --block.db ssd/db0 --osd-id 0 > >> >> >>> >>> > ceph-volume lvm prepare --bluestore --data > hdd1/data1 --block.db ssd/db1 --osd-id 1 > >> >> >>> >>> > > >> >> >>> >>> > so that Filestore -> Bluestore migration will not > change the osd ID on each disk? > >> >> >>> >>> > >> >> >>> >>> That looks correct. > >> >> >>> >>> > >> >> >>> >>> > > >> >> >>> >>> > And one more question. Are there any changes I need > to make to the ceph.conf file? I did comment out this line that was > probably used for creating Filestore (using ceph-deploy): osd > journal size = 40960 > >> >> >>> >>> > >> >> >>> >>> Since you've pre-created the LVs the commented out > line will not > >> >> >>> >>> affect anything. > >> >> >>> >>> > >> >> >>> >>> > > >> >> >>> >>> > > >> >> >>> >>> > > >> >> >>> >>> > On Wed, Oct 31, 2018 at 7:03 AM, Alfredo Deza > <adeza@xxxxxxxxxx <mailto:adeza@xxxxxxxxxx>> wrote: > >> >> >>> >>> >> > >> >> >>> >>> >> On Wed, Oct 31, 2018 at 5:22 AM Hector Martin > <hector@xxxxxxxxxxxxxx <mailto:hector@xxxxxxxxxxxxxx>> wrote: > >> >> >>> >>> >> > > >> >> >>> >>> >> > On 31/10/2018 05:55, Hayashida, Mami wrote: > >> >> >>> >>> >> > > I am relatively new to Ceph and need some > advice on Bluestore migration. > >> >> >>> >>> >> > > I tried migrating a few of our test cluster > nodes from Filestore to > >> >> >>> >>> >> > > Bluestore by following this > >> >> >>> >>> >> > > > (http://docs.ceph.com/docs/luminous/rados/operations/bluestore-migration/ > <http://docs.ceph.com/docs/luminous/rados/operations/bluestore-migration/>) > >> >> >>> >>> >> > > as the cluster is currently running 12.2.9. The > cluster, originally set > >> >> >>> >>> >> > > up by my predecessors, was running Jewel until > I upgraded it recently to > >> >> >>> >>> >> > > Luminous. > >> >> >>> >>> >> > > > >> >> >>> >>> >> > > OSDs in each OSD host is set up in such a way > that for ever 10 data HDD > >> >> >>> >>> >> > > disks, there is one SSD drive that is holding > their journals. For > >> >> >>> >>> >> > > example, osd.0 data is on /dev/sdh and its > Filestore journal is on a > >> >> >>> >>> >> > > partitioned part of /dev/sda. So, lsblk shows > something like > >> >> >>> >>> >> > > > >> >> >>> >>> >> > > sda 8:0 0 447.1G 0 disk > >> >> >>> >>> >> > > ├─sda1 8:1 0 40G 0 part # journal for > osd.0 > >> >> >>> >>> >> > > > >> >> >>> >>> >> > > sdh 8:112 0 3.7T 0 disk > >> >> >>> >>> >> > > └─sdh1 8:113 0 3.7T 0 part > /var/lib/ceph/osd/ceph-0 > >> >> >>> >>> >> > > > >> >> >>> >>> >> > > >> >> >>> >>> >> > The BlueStore documentation states that the wal > will automatically use > >> >> >>> >>> >> > the db volume if it fits, so if you're using a > single SSD I think > >> >> >>> >>> >> > there's no good reason to split out the wal, if > I'm understanding it > >> >> >>> >>> >> > correctly. > >> >> >>> >>> >> > >> >> >>> >>> >> This is correct, no need for wal in this case. > >> >> >>> >>> >> > >> >> >>> >>> >> > > >> >> >>> >>> >> > You should be using ceph-volume, since ceph-disk > is deprecated. If > >> >> >>> >>> >> > you're sharing the SSD as wal/db for a bunch of > OSDs, I think you're > >> >> >>> >>> >> > going to have to create the LVs yourself first. > The data HDDs should be > >> >> >>> >>> >> > PVs (I don't think it matters if they're > partitions or whole disk PVs as > >> >> >>> >>> >> > long as LVM discovers them) each part of a > separate VG (e.g. hdd0-hdd9) > >> >> >>> >>> >> > containing a single LV. Then the SSD should > itself be an LV for a > >> >> >>> >>> >> > separate shared SSD VG (e.g. ssd). > >> >> >>> >>> >> > > >> >> >>> >>> >> > So something like (assuming sda is your wal SSD > and sdb and onwards are > >> >> >>> >>> >> > your OSD HDDs): > >> >> >>> >>> >> > pvcreate /dev/sda > >> >> >>> >>> >> > pvcreate /dev/sdb > >> >> >>> >>> >> > pvcreate /dev/sdc > >> >> >>> >>> >> > ... > >> >> >>> >>> >> > > >> >> >>> >>> >> > vgcreate ssd /dev/sda > >> >> >>> >>> >> > vgcreate hdd0 /dev/sdb > >> >> >>> >>> >> > vgcreate hdd1 /dev/sdc > >> >> >>> >>> >> > ... > >> >> >>> >>> >> > > >> >> >>> >>> >> > lvcreate -L 40G -n db0 ssd > >> >> >>> >>> >> > lvcreate -L 40G -n db1 ssd > >> >> >>> >>> >> > ... > >> >> >>> >>> >> > > >> >> >>> >>> >> > lvcreate -L 100%VG -n data0 hdd0 > >> >> >>> >>> >> > lvcreate -L 100%VG -n data1 hdd1 > >> >> >>> >>> >> > ... > >> >> >>> >>> >> > > >> >> >>> >>> >> > ceph-volume lvm prepare --bluestore --data > hdd0/data0 --block.db ssd/db0 > >> >> >>> >>> >> > ceph-volume lvm prepare --bluestore --data > hdd1/data1 --block.db ssd/db1 > >> >> >>> >>> >> > ... > >> >> >>> >>> >> > > >> >> >>> >>> >> > ceph-volume lvm activate --all > >> >> >>> >>> >> > > >> >> >>> >>> >> > I think it might be possible to just let > ceph-volume create the PV/VG/LV > >> >> >>> >>> >> > for the data disks and only manually create the > DB LVs, but it shouldn't > >> >> >>> >>> >> > hurt to do it on your own and just give > ready-made LVs to ceph-volume > >> >> >>> >>> >> > for everything. > >> >> >>> >>> >> > >> >> >>> >>> >> Another alternative here is to use the new `lvm > batch` subcommand to > >> >> >>> >>> >> do all of this in one go: > >> >> >>> >>> >> > >> >> >>> >>> >> ceph-volume lvm batch /dev/sda /dev/sdb /dev/sdc > /dev/sdd /dev/sde > >> >> >>> >>> >> /dev/sdf /dev/sdg /dev/sdh > >> >> >>> >>> >> > >> >> >>> >>> >> Will detect that sda is an SSD and will create the > LVs for you for > >> >> >>> >>> >> block.db (one for each spinning disk). For each > spinning disk, it will > >> >> >>> >>> >> place data on them. > >> >> >>> >>> >> > >> >> >>> >>> >> The one caveat is that you no longer control OSD > IDs, and they are > >> >> >>> >>> >> created with whatever the monitors are giving out. > >> >> >>> >>> >> > >> >> >>> >>> >> This operation is not supported from ceph-deploy > either. > >> >> >>> >>> >> > > >> >> >>> >>> >> > -- > >> >> >>> >>> >> > Hector Martin (hector@xxxxxxxxxxxxxx > <mailto:hector@xxxxxxxxxxxxxx>) > >> >> >>> >>> >> > Public Key: https://marcan.st/marcan.asc > >> >> >>> >>> >> > _______________________________________________ > >> >> >>> >>> >> > ceph-users mailing list > >> >> >>> >>> >> > ceph-users@xxxxxxxxxxxxxx > <mailto:ceph-users@xxxxxxxxxxxxxx> > >> >> >>> >>> >> > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com> > >> >> >>> >>> > > >> >> >>> >>> > > >> >> >>> >>> > > >> >> >>> >>> > > >> >> >>> >>> > -- > >> >> >>> >>> > Mami Hayashida > >> >> >>> >>> > Research Computing Associate > >> >> >>> >>> > > >> >> >>> >>> > Research Computing Infrastructure > >> >> >>> >>> > University of Kentucky Information Technology Services > >> >> >>> >>> > 301 Rose Street | 102 James F. Hardymon Building > >> >> >>> >>> > Lexington, KY 40506-0495 > >> >> >>> >>> > mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > >> >> >>> >>> > (859)323-7521 > >> >> >>> >> > >> >> >>> >> > >> >> >>> >> > >> >> >>> >> > >> >> >>> >> -- > >> >> >>> >> Mami Hayashida > >> >> >>> >> Research Computing Associate > >> >> >>> >> > >> >> >>> >> Research Computing Infrastructure > >> >> >>> >> University of Kentucky Information Technology Services > >> >> >>> >> 301 Rose Street | 102 James F. Hardymon Building > >> >> >>> >> Lexington, KY 40506-0495 > >> >> >>> >> mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > >> >> >>> >> (859)323-7521 > >> >> >>> > > >> >> >>> > > >> >> >>> > > >> >> >>> > > >> >> >>> > -- > >> >> >>> > Mami Hayashida > >> >> >>> > Research Computing Associate > >> >> >>> > > >> >> >>> > Research Computing Infrastructure > >> >> >>> > University of Kentucky Information Technology Services > >> >> >>> > 301 Rose Street | 102 James F. Hardymon Building > >> >> >>> > Lexington, KY 40506-0495 > >> >> >>> > mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > >> >> >>> > (859)323-7521 > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> >> -- > >> >> >> Mami Hayashida > >> >> >> Research Computing Associate > >> >> >> > >> >> >> Research Computing Infrastructure > >> >> >> University of Kentucky Information Technology Services > >> >> >> 301 Rose Street | 102 James F. Hardymon Building > >> >> >> Lexington, KY 40506-0495 > >> >> >> mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > >> >> >> (859)323-7521 > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > -- > >> >> > Mami Hayashida > >> >> > Research Computing Associate > >> >> > > >> >> > Research Computing Infrastructure > >> >> > University of Kentucky Information Technology Services > >> >> > 301 Rose Street | 102 James F. Hardymon Building > >> >> > Lexington, KY 40506-0495 > >> >> > mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > >> >> > (859)323-7521 > >> > > >> > > >> > > >> > > >> > -- > >> > Mami Hayashida > >> > Research Computing Associate > >> > > >> > Research Computing Infrastructure > >> > University of Kentucky Information Technology Services > >> > 301 Rose Street | 102 James F. Hardymon Building > >> > Lexington, KY 40506-0495 > >> > mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > >> > (859)323-7521 > > > > > > > > > > -- > > Mami Hayashida > > Research Computing Associate > > > > Research Computing Infrastructure > > University of Kentucky Information Technology Services > > 301 Rose Street | 102 James F. Hardymon Building > > Lexington, KY 40506-0495 > > mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > > (859)323-7521 > > > > > -- > *Mami Hayashida* > /Research Computing Associate > / > Research Computing Infrastructure > University of Kentucky Information Technology Services > 301 Rose Street | 102 James F. Hardymon Building > Lexington, KY 40506-0495 > mami.hayashida@xxxxxxx <mailto:mami.hayashida@xxxxxxx> > (859)323-7521 -- Hector Martin (hector@xxxxxxxxxxxxxx) Public Key: https://mrcn.st/pub _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |