I migrated my OSDs from filestore to bluestore.
Each node now has 1 SSD with the OS and the BlockDBs and 3 HDDs with
bluestore data.
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdd 8:48 0 2.7T 0 disk
|-sdd2 8:50 0 2.7T 0 part
`-sdd1 8:49 0 100M 0 part /var/lib/ceph/osd/ceph-2
sdb 8:16 0 3.7T 0 disk
|-sdb2 8:18 0 3.7T 0 part
`-sdb1 8:17 0 100M 0 part /var/lib/ceph/osd/ceph-0
sdc 8:32 0 3.7T 0 disk
|-sdc2 8:34 0 3.7T 0 part
`-sdc1 8:33 0 100M 0 part /var/lib/ceph/osd/ceph-1
sda 8:0 0 223.6G 0 disk
|-sda4 8:4 0 1G 0 part
|-sda2 8:2 0 37.3G 0 part /
|-sda5 8:5 0 1G 0 part
|-sda3 8:3 0 1G 0 part
`-sda1 8:1 0 953M 0 part /boot/efi
Now the I/O works better, and I never saw again a slow response (OSD not
MDS) warning.
But when I reboot a ceph node the OSDs takes too long to get up. With
filestore it was almost inmediate.
Monitoring /proc/$(pidod ceph-osd)/io I could see that each OSD reads
about 800 MBytes before getting up (My block.db partitions are 1G).
Does the OSDs start re-process all the block.db when booting up?
There's any way to accelerate the OSD availability after a reboot?
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
