Re: Many concurrent drive failures - How do I activate pgs?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 31/05/2018 14:41, Simon Ironside wrote:
> On 24/05/18 19:21, Lionel Bouton wrote:
>
>> Unfortunately I just learned that Supermicro found an incompatibility
>> between this motherboard and SM863a SSDs (I don't have more information
>> yet) and they proposed S4600 as an alternative. I immediately remembered
>> that there were problems and asked for a delay/more information and dug
>> out this old thread.
>
> In case it helps you, I'm about to go down the same Supermicro EPYC
> and SM863a path as you. I asked about the incompatibility you
> mentioned and they knew what I was referring to. The incompatibility
> is between the on-board SATA controller and the SM863a and has
> apparently already been fixed.

That's good news.

> Even if not fixed, the incompatibility wouldn't be present if you're
> using a RAID controller instead of the on board SATA (which I intend
> to - don't know if you were?).

I wasn't : we plan to use the 14 on board SATA connectors. As long as we
can we use a standard SATA/AHCI controller as they cause less headaches
than RAID controllers even in HBA mode.

Thanks a lot for this information, I've forwarded it to our Supermicro
reseller.

Best regards,

Lionel
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux