Keep in mind that as yet we don't really have good estimates for how large bluestore metadata DBs may become, but it will be somewhat proportional to your number of objects. Considering the size of your OSDs, a 15GB block.db partition is almost certainly too small. Unless you've got a compelling reason not to you should probably partition your SSDs to use all the available space. Personally, I manually partition my block.db devices into even partitions and then invoke creation with ceph-disk prepare --bluestore /dev/sdX --block.db /dev/disk/by-partuuid/whateveritis Invoking by UUID is done because if presented an existing partition rather than the root block device it will just symlink precisely to the argument given, so using /dev/sdXYZ arguments is dangerous as they may not be consistent across hardware changes or even just reboots depending on your system. Rich On 23/11/17 09:53, Caspar Smit wrote: > Rudi, > > First off all do not deploy an OSD specifying the same seperate device for DB and WAL: > > Please read the following why: > > http://docs.ceph.com/docs/master/rados/configuration/bluestore-config-ref/ > > > That said you have a fairly large amount of SSD size available so i recommend using it as block.db: > > You can specify a fixed size block.db size in ceph.conf using: > > [global] > bluestore_block_db_size = 16106127360 > > The above is a 15GB block.db size > > Now when you deploy an OSD with a seperate block.db device the partition will be 15GB. > > The default size is a percentage of the device i believe and not always a usable amount. > > Caspar > > Met vriendelijke groet, > > Caspar Smit > Systemengineer > SuperNAS > Dorsvlegelstraat 13 > 1445 PA Purmerend > > t: (+31) 299 410 414 > e: casparsmit@xxxxxxxxxxx <mailto:casparsmit@xxxxxxxxxxx> > w: www.supernas.eu <http://www.supernas.eu> > > 2017-11-23 10:27 GMT+01:00 Rudi Ahlers <rudiahlers@xxxxxxxxx <mailto:rudiahlers@xxxxxxxxx>>: > > Hi, > > Can someone please explain this to me in layman's terms. How big a WAL drive do I really need? > > I have a 2x 400GB SSD drives used as WAL / DB drive and 4x 8TB HDD's used as OSD's. When I look at the drive partitions the DB / WAL partitions are only 576Mb & 1GB respectively. This feels a bit small. > > > root@virt1:~# lsblk > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:0 0 7.3T 0 disk > ├─sda1 8:1 0 100M 0 part /var/lib/ceph/osd/ceph-0 > └─sda2 8:2 0 7.3T 0 part > sdb 8:16 0 7.3T 0 disk > ├─sdb1 8:17 0 100M 0 part /var/lib/ceph/osd/ceph-1 > └─sdb2 8:18 0 7.3T 0 part > sdc 8:32 0 7.3T 0 disk > ├─sdc1 8:33 0 100M 0 part /var/lib/ceph/osd/ceph-2 > └─sdc2 8:34 0 7.3T 0 part > sdd 8:48 0 7.3T 0 disk > ├─sdd1 8:49 0 100M 0 part /var/lib/ceph/osd/ceph-3 > └─sdd2 8:50 0 7.3T 0 part > sde 8:64 0 372.6G 0 disk > ├─sde1 8:65 0 1G 0 part > ├─sde2 8:66 0 576M 0 part > ├─sde3 8:67 0 1G 0 part > └─sde4 8:68 0 576M 0 part > sdf 8:80 0 372.6G 0 disk > ├─sdf1 8:81 0 1G 0 part > ├─sdf2 8:82 0 576M 0 part > ├─sdf3 8:83 0 1G 0 part > └─sdf4 8:84 0 576M 0 part > sdg 8:96 0 118G 0 disk > ├─sdg1 8:97 0 1M 0 part > ├─sdg2 8:98 0 256M 0 part /boot/efi > └─sdg3 8:99 0 117.8G 0 part > ├─pve-swap 253:0 0 8G 0 lvm [SWAP] > ├─pve-root 253:1 0 29.3G 0 lvm / > ├─pve-data_tmeta 253:2 0 68M 0 lvm > │ └─pve-data 253:4 0 65.9G 0 lvm > └─pve-data_tdata 253:3 0 65.9G 0 lvm > └─pve-data 253:4 0 65.9G 0 lvm > > > > > -- > Kind Regards > Rudi Ahlers > Website: http://www.rudiahlers.co.za > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com> > > > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > -- Richard Hesketh Systems Engineer, Research Platforms BBC Research & Development
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
