Re: crush optimize does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Am 27.10.2017 um 19:00 schrieb David Turner:
> What does your crush map look like?  Also a `ceph df` output.  You're
> optimizing your map for pool #5, if there are other pools with a
> significant amount of data, then your going to be off on your cluster
> balance.

There are no other pools at all. The crushmap has nothing special in it.
Just hosts and osds.

> A big question for balancing a cluster is how big are your PGs?  If your
> primary data pool has PGs that are 100GB in size, then even if you
> balanced the cluster such that all of the osds were within 1 PG of each
> other (assuming your average OSD size <1TB), then your OSDs would be 10%
> apart in disk usage from each other and 100GB.

There are 4096 pgs and 136 osds. I'm not talking about 10% it's 67%
usage vs . 92%.

Also crush optimize was working fine for other clusters.

Stefan
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux