| Hi Josy,
just a doubt but it looks like your ASOK file is the one from a Ceph Manager. So my suspicion is that you may be running the command from the wrong machine.
To run this command, you need to ssh into the machine where the client connection is being initiated.
But may be I am wrong regarding your exact connection point.
As Jason points it out you also need to make sure that your restart the client connection for the changes in the ceph.conf file to take effect.
Regards
JC Lopez
Senior Technical Instructor, Global Storage Consulting Practice
Red Hat, Inc.
jelopez@xxxxxxxxxx
+1 408-680-6959
Thanks for the reply. I added rbd_non_blocking_aio = false in ceph.conf and pushed the
admin file to all nodes. -----
[client]
admin socket = /var/run/ceph/$cluster-$type.$id.$pid.$cctid.asok
log file = /var/log/ceph/client.log
debug rbd = 20
debug librbd = 20
rbd_non_blocking_aio = false
------
However the config show command still shows it as true.
-----------
[cephuser@ceph-las-admin-a1 ceph-cluster]$ sudo ceph
--admin-daemon /var/run/ceph/ceph-mgr.ceph-las-admin-a1.asok
config show | grep "rbd_non_blocking_aio"
"rbd_non_blocking_aio": "true",
-----------
Did I miss something ?
On 18-10-2017 01:22, Jean-Charles Lopez
wrote:
Hi
syntax uses the admin socket file : ceph
--admin-daemon /var/run/ceph/$cluster-$type.$id.$pid.$cctid.asok
config get rbd_cache
Should be
/var/run/ceph/ceph.client.admin.$pid.$cctid.asok if your
connection is using client.admin to connect to the cluster and
your cluster name is set to the default of ceph. But obviously
can’t know from here the PID and the CCTID you will have to
identify.
You can actually do a ls /var/run/ceph to find the
correct admin socket file
Regards
JC Lopez
Senior Technical Instructor, Global Storage
Consulting Practice
Red Hat, Inc.
jelopez@xxxxxxxxxx
+1 408-680-6959
|
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
