> Op 16 oktober 2017 om 13:00 schreef Nagy Ákos <nagy.akos@xxxxxxxxxxxxxx>: > > > Thanks, > > but I erase all of the data, I have only this backup. I hate to bring the bad news, but it will not work. The pools have different IDs and that will make it very difficult to get this working again. Wido > If the restore work for 3 pools, I can do it for the remainig 2? > > What can I try to set, to import it or how I can find this IDs? > > 2017. 10. 16. 13:39 keltezéssel, John Spray írta: > > On Mon, Oct 16, 2017 at 11:35 AM, Nagy Ákos <nagy.akos@xxxxxxxxxxxxxx> wrote: > >> Hi, > >> > >> I want to upgrade my ceph from jewel to luminous, and switch to bluestore. > >> > >> For that I export the pools from old cluster: > > This is not the way to do it. You should convert your OSDs from > > filestore to bluestore one by one, and let the data re-replicate to > > the new OSDs. > > > > Dumping data out of one Ceph cluster and into another will not work, > > because things like RBD images record things like the ID of the pool > > where their parent image is, and pool IDs are usually different > > between clusters. > > > > John > > > >> rados export -p pool1 pool1.ceph > >> > >> and after upgrade and osd recreation: > >> > >> rados --create -p pool1 import pool1.ceph > >> > >> I can import the backup without error, but when I want to map an image, I > >> got error: > >> > >> rbd --image container1 --pool pool1 map > >> > >> rbd: sysfs write failed > >> In some cases useful info is found in syslog - try "dmesg | tail". > >> rbd: map failed: (2) No such file or directory > >> > >> dmesg | tail > >> > >> [160606.729840] rbd: image container1 : WARNING: kernel layering is > >> EXPERIMENTAL! > >> [160606.730675] libceph: tid 86731 pool does not exist > >> > >> > >> When I try to get info about the image: > >> > >> rbd info pool1/container1 > >> > >> 2017-10-16 13:18:17.404858 7f35a37fe700 -1 > >> librbd::image::RefreshParentRequest: failed to open parent image: (2) No > >> such file or directory > >> 2017-10-16 13:18:17.404903 7f35a37fe700 -1 librbd::image::RefreshRequest: > >> failed to refresh parent image: (2) No such file or directory > >> 2017-10-16 13:18:17.404930 7f35a37fe700 -1 librbd::image::OpenRequest: > >> failed to refresh image: (2) No such file or directory > >> rbd: error opening image container1: (2) No such file or directory > >> > >> > >> I check to exported image checksum after export and before import, and it's > >> match, and I can restore three pools with one with 60 MB one with 1.2 GB and > >> one with 25 GB of data. > >> > >> The problematic has 60 GB data. > >> > >> The pool store LXD container images. > >> > >> Any help is highly appreciated. > >> > >> -- > >> Ákos > >> > >> > >> _______________________________________________ > >> ceph-users mailing list > >> ceph-users@xxxxxxxxxxxxxx > >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >> > > -- > Ákos > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |