|
On 30.08.2017 15:32, Steve Taylor
wrote:
I'm not familiar with dd_rescue, but I've just been reading
about it. I'm not seeing any features that would be beneficial
in this scenario that aren't also available in dd. What specific
features give it "really a far better chance
of restoring a copy of your disk" than dd? I'm always interested
in learning about new recovery tools.
i see i wrote dd_rescue from old habit, but the package one should
use on debian is gddrescue or also called gnu ddrecue.
this page have some details on the differences on dd vs the ddrescue
variants.
http://www.toad.com/gnu/sysadmin/index.html#ddrescue
kind regards
Ronny Aasen
| If you are not the intended recipient
of this message or received it erroneously, please
notify the sender and delete it, together with any
attachments, and be advised that any dissemination or
copying of this message is prohibited. |
On Tue, 2017-08-29 at 21:49 +0200, Willem Jan Withagen wrote:
On 29-8-2017 19:12, Steve Taylor wrote:
Hong,
Probably your best chance at recovering any data without special,
expensive, forensic procedures is to perform a dd from /dev/sdb to
somewhere else large enough to hold a full disk image and attempt to
repair that. You'll want to use 'conv=noerror' with your dd command
since your disk is failing. Then you could either re-attach the OSD
from the new source or attempt to retrieve objects from the filestore
on it.
Like somebody else already pointed out
In problem "cases like disk, use dd_rescue.
It has really a far better chance of restoring a copy of your disk
--WjW
I have actually done this before by creating an RBD that matches the
disk size, performing the dd, running xfs_repair, and eventually
adding it back to the cluster as an OSD. RBDs as OSDs is certainly a
temporary arrangement for repair only, but I'm happy to report that it
worked flawlessly in my case. I was able to weight the OSD to 0,
offload all of its data, then remove it for a full recovery, at which
point I just deleted the RBD.
The possibilities afforded by Ceph inception are endless. ☺
Steve Taylor | Senior Software Engineer | StorageCraft Technology Corporation
380 Data Drive Suite 300 | Draper | Utah | 84020
Office: 801.871.2799 |
If you are not the intended recipient of this message or received it erroneously, please notify the sender and delete it, together with any attachments, and be advised that any dissemination or copying of this message is prohibited.
On Mon, 2017-08-28 at 23:17 +0100, Tomasz Kusmierz wrote:
Rule of thumb with batteries is:
- more “proper temperature” you run them at the more life you get out
of them
- more battery is overpowered for your application the longer it will
survive.
Get your self a LSI 94** controller and use it as HBA and you will be
fine. but get MORE DRIVES !!!!! …
On 28 Aug 2017, at 23:10, hjcho616 <hjcho616@xxxxxxxxx> wrote:
Thank you Tomasz and Ronny. I'll have to order some hdd soon and
try these out. Car battery idea is nice! I may try that.. =) Do
they last longer? Ones that fit the UPS original battery spec
didn't last very long... part of the reason why I gave up on them..
=P My wife probably won't like the idea of car battery hanging out
though ha!
The OSD1 (one with mostly ok OSDs, except that smart failure)
motherboard doesn't have any additional SATA connectors available.
Would it be safe to add another OSD host?
Regards,
Hong
On Monday, August 28, 2017 4:43 PM, Tomasz Kusmierz <tom.kusmierz@g
mail.com> wrote:
Sorry for being brutal … anyway
1. get the battery for UPS ( a car battery will do as well, I’ve
moded on ups in the past with truck battery and it was working like
a charm :D )
2. get spare drives and put those in because your cluster CAN NOT
get out of error due to lack of space
3. Follow advice of Ronny Aasen on hot to recover data from hard
drives
4 get cooling to drives or you will loose more !
On 28 Aug 2017, at 22:39, hjcho616 <hjcho616@xxxxxxxxx> wrote:
Tomasz,
Those machines are behind a surge protector. Doesn't appear to
be a good one! I do have a UPS... but it is my fault... no
battery. Power was pretty reliable for a while... and UPS was
just beeping every chance it had, disrupting some sleep.. =P So
running on surge protector only. I am running this in home
environment. So far, HDD failures have been very rare for this
environment. =) It just doesn't get loaded as much! I am not
sure what to expect, seeing that "unfound" and just a feeling of
possibility of maybe getting OSD back made me excited about it.
=) Thanks for letting me know what should be the priority. I
just lack experience and knowledge in this. =) Please do continue
to guide me though this.
Thank you for the decode of that smart messages! I do agree that
looks like it is on its way out. I would like to know how to get
good portion of it back if possible. =)
I think I just set the size and min_size to 1.
# ceph osd lspools
0 data,1 metadata,2 rbd,
# ceph osd pool set rbd size 1
set pool 2 size to 1
# ceph osd pool set rbd min_size 1
set pool 2 min_size to 1
Seems to be doing some backfilling work.
# ceph health
HEALTH_ERR 22 pgs are stuck inactive for more than 300 seconds; 2
pgs backfill_toofull; 74 pgs backfill_wait; 3 pgs backfilling;
108 pgs degraded; 6 pgs down; 6 pgs inconsistent; 6 pgs peering;
7 pgs recovery_wait; 16 pgs stale; 108 pgs stuck degraded; 6 pgs
stuck inactive; 16 pgs stuck stale; 130 pgs stuck unclean; 101
pgs stuck undersized; 101 pgs undersized; 1 requests are blocked
32 sec; recovery 1790657/4502340 objects degraded (39.772%);
recovery 641906/4502340 objects misplaced (14.257%); recovery
147/2251990 unfound (0.007%); 50 scrub errors; mds cluster is
degraded; no legacy OSD present but 'sortbitwise' flag is not set
Regards,
Hong
On Monday, August 28, 2017 4:18 PM, Tomasz Kusmierz <tom.kusmierz
@gmail.com> wrote:
So to decode few things about your disk:
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail
Always - 37
37 read erros and only one sector marked as pending - fun disk
:/
181 Program_Fail_Cnt_Total 0x0022 099 099 000 Old_age
Always - 35325174
So firmware has quite few bugs, that’s nice
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age
Always - 2855
disk was thrown around while operational even more nice.
194 Temperature_Celsius 0x0002 047 041 000 Old_age
Always - 53 (Min/Max 15/59)
if your disk passes 50 you should not consider using it, high
temperatures demagnetise plate layer and you will see more errors
in very near future.
197 Current_Pending_Sector 0x0032 100 100 000 Old_age
Always - 1
as mentioned before :)
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age
Always - 4222
your heads keep missing tracks … bent ? I don’t even know how to
comment here.
generally fun drive you’ve got there … rescue as much as you can
and throw it away !!!
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
|
