Re: experiences in upgrading Infernalis to Jewel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Alexandre!!

We plan to proceed as follows for upgrading infernalis to jewel:

Enable Repo on all Nodes
#cat /etc/apt/sources.list.d/ceph_com_jewel.list
deb http://download.ceph.com/debian-jewel trusty main

For all Monitors (one after the other)
1) sudo apt-get update && sudo apt-get install ceph-common
2) service ceph stop
3) service ceph start

For all OSDs (one after the other)
1) sudo apt-get update && sudo apt-get install ceph-common
2) service ceph stop
3) service ceph start

based on the documentation there are no "release specific" procedures
for upgrading infernalis to jewel
http://docs.ceph.com/docs/jewel/install/upgrading-ceph/

Other opinions/Recommendations are very welcome! Is it really that
simple and unproblematic ??

Thanks and regards
felder





On 09/07/2016 02:33 PM, Alexandre DERUMIER wrote:
> Hi,
>
> I think it's more simple to 
>
> 1) change the repository
> 2) apt-get dist-upgrade
>
> 3) restart mon on each node
> 4) restart osd on each node
>
> done
>
>
> I have upgrade 4 cluster like this without any problem
> I never have used ceph-deploy for upgrade.
>
>
> ----- Mail original -----
> De: "felderm" <felderm222@xxxxxxxxx>
> À: "ceph-users" <ceph-users@xxxxxxxx>
> Envoyé: Mercredi 7 Septembre 2016 14:27:02
> Objet:  experiences in upgrading Infernalis to Jewel
>
> Hi All 
>
> We are preparing upgrade from Ceph Infernalis 9.2.0 to Ceph Jewel 
> 10.2.2. Based on the Upgrade procedure documentation 
> http://docs.ceph.com/docs/jewel/install/upgrading-ceph/ it sound easy. 
> But it often fails when you think it's easy. Therefore I would like to 
> know your opinion for the following questions: 
>
> 1) We think to upgrade one monitor after each other. If we break one 
> monitor, the 2 others are still operational. 
>
> in the Documentation the propose 
> ceph-deploy install --release jewel mon1 mon2 mon3 
>
> Wouldn't it be wise to upgrade one after the other? 
> ceph-deploy install --release jewel mon1 
> ceph-deploy install --release jewel mon2 
> ceph-deploy install --release jewel mon3 
>
> Same procedure for Monitor Nodes ?? 
>
> 2) On which node would you recommend running the ceph-deploy command? 
> which one is the admin node? 
>
> 3) If we are using ceph-deploy for upgrading, do we need to change the 
> apt repository? 
> #cat /etc/apt/sources.list.d/ceph_com_debian_infernalis.list 
> deb http://ceph.com/debian-infernalis trusty main 
>
> 4) There is not possibility to revert the upgrade. Is there any plan B 
> when the upgrade fails ? Sorry for being so pessimistic. 
>
> 5) General Experiences in upgrading ceph? Does it fails often? How was 
> your plan B in case of upgrade failures ? 
>
> Your feedbacks are highly appreciated! 
> Thanks 
> felder 
>
>
>
> _______________________________________________ 
> ceph-users mailing list 
> ceph-users@xxxxxxxxxxxxxx 
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com 
>

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux