Re: How do ceph clients determine a monitor's address (and esp. port) for initial connection?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 13, 2016 at 12:51 AM, Christian Sarrasin
<c.nntp@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Greg,
>
> Thanks again and good guess!  Amending testcluster.conf as follows:
>
> mon host = 192.168.10.201:6788
> mon addr = 192.168.10.201:6788
>
> ... gets around the problem.
>
> having "mon host = mona:6788" also works.
>
> Should I raise a defect or is this workaround good enough?

Well, if the docs don't make that clear it sounds like a doc bug, at least!
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux